$3.95
On Hold
Center Bolt for Bicycle Side Pull REAR Caliper Brake
Only 1 available, 4 sold
Details
Shipping: US-Mainland: $2.50 (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
>>> DESCRIPTION:
This is a steel center bolt that fits the arms of most side pull brakes, but not all of them. It is for the REAR brake. The distributor is SUNLITE. It is meant to be used as a replacement part for most side-pull rear caliper brakes.
The diameter of the bolt is about 6 mm. You can see in the picture a thick pad that is fastened to the post. That pad has slots on one side for a spring. The thickness of this pad is about 9 mm. The spring is NOT INCLUDED.
The length of the part of the bolt that is on the same side as the slots is about 22 mm. That is shown on the right side of the picture. On that part of the bolt, there is one metal washer, 1 plastic spacer washer, one red thin metal washer with the name of the manufacturer "Alhonga" on it, one regular type nut, and one nut for the end of the bolt which you should tighten very tight against the other nut while holding the other nut with a thin wrench to keep it from turning while you are tightening.
On the part of the bolt that is on the opposite side from the slots, which is the left part in the picture, has 2 concave washers, one metal washer, and one nut with a nylon insert to help prevent it from loosening.
PLEASE NOTICE THAT ONLY THE PARTS SHOWN IN THE PICTURE ARE INCLUDED. The brake arms, shoes, and spring are NOT included.
This is a steel center bolt that fits the arms of most side pull brakes, but not all of them. It is for the REAR brake. The distributor is SUNLITE. It is meant to be used as a replacement part for most side-pull rear caliper brakes.
The diameter of the bolt is about 6 mm. You can see in the picture a thick pad that is fastened to the post. That pad has slots on one side for a spring. The thickness of this pad is about 9 mm. The spring is NOT INCLUDED.
The length of the part of the bolt that is on the same side as the slots is about 22 mm. That is shown on the right side of the picture. On that part of the bolt, there is one metal washer, 1 plastic spacer washer, one red thin metal washer with the name of the manufacturer "Alhonga" on it, one regular type nut, and one nut for the end of the bolt which you should tighten very tight against the other nut while holding the other nut with a thin wrench to keep it from turning while you are tightening.
On the part of the bolt that is on the opposite side from the slots, which is the left part in the picture, has 2 concave washers, one metal washer, and one nut with a nylon insert to help prevent it from loosening.
PLEASE NOTICE THAT ONLY THE PARTS SHOWN IN THE PICTURE ARE INCLUDED. The brake arms, shoes, and spring are NOT included.
