298 Electric Nail Manicure Pedicure Drill File Tool Kit

Features:

Elegant appearance Style, simple elegant modeling.

Stable performance, high quality, use well in environment

Input voltage rage: AC 100-120V, 220-240V 60/50Hz.

Output voltage scope: DC 1.25-17V. Continuously adjustable.

The handset adopts the card buckles tight structure, safety, conveniently disassembles.

Transmission system adopts the structure of dual absorption of shock, Extremely quiet and smooth - No Vibration.

17000-19000RPM

Forward and reverse Operation switch.

Over voltage and over current protection intruction in machine.

Specification:


Main (power supply & Control) part

Rated voltage range:110-120V 50/60Hz

Output rated voltage DC2-17V

Rated power input:10W

Output current:0.8A

Hand piece(motor)part

Working voltage:DC2-17V

Rated current:0.56A

No load speed:17000-19000RPM

Load speed:16000-18500RPM


Package:

Main machine

Handpiece

Thirty types Pro bits set

Six types basic bits set


Attention:


-The beginning rotational speed is no more than 7000RPM. Then increase slowly after half an hour, which could protect the handpiece and make it work longer.

-To avoid the handpiece being overheated, please stop using for about 10 minutes after one-hour working.


Creative Nail Design UV Gel LAMP - Pink color

Installation:
1, The windows of Ultraviolet Radiation Lamp shall face to the front of the user

2, Connect the power line plug into the electric socket

Operation:

1, Press the power switch to ON or "L", the indicator LED of time start switch is lighten.

2, Press the delay switch to 12secs, press the time start switch, all of the Ultraviolet Radiation Lamp are on, all machine in work

3, Put the band into the region of lamp, until 120secs, all of the Ultraviolet Radiation Lamp are off.At the same time, the process of dryness and sterilzation are finished.

4, Press the Delay Switch to "time", Ultraviolet Radiation Lamp are on, the time is infinite.At the same time,press the power Switch to OFF or "O", the machine stop working.

5, When the Delay Switch at "time", Ultraviolet Radiation lamp work in the infinite then press the Delay switch to "120 sec", the LED lamp lighten still,but the machine will into delay estate again.The time to 120secs, the Ultraviolet Radiation lamp off.

6, Press the power switch to OFF or "O", the power closed and 120S/ the machine stop working.

Specification:

1, Rated voltage range: 110~120V; 220~240V 50/60Hz

2, Rated power: 36/42/45W

3, Rated current: 0.2~0.35A

4, Working Temperature: -15℃ ~ 50℃

Instructions:

1, Please accord the rated voltage with the machine, or else it is easy to make the machine broken

2, Please no try to plug out the power line when the machine in work, unless you close the power switch.

3, Don't make the water and sundries and so on into the machine, or else the machine will stop running as normal.

4, Use the wet cloth and litmusless scour to sweep the dirty in the surface of machine.Please pay attention to close the power switch.

5, Please plug the power line out of electric socket, if you don't use in a long time.

6, Any unauthorized disassembling of the product is prohibited. In case of any break down, please contact the agent or authorized repair center. We promise wise, high-quality and satisfactory service.

7, If the supply cord is damaged, it must be replaced by the manufacture, its service agent or similarly qualified persons in order avoid a hazard.