High Security Wheel Lug Nut Lock Removal Free-Spinning Outer Collar & Spline

Complete Slide Hammer and High Security Wheel Lug Nut Lock Removal Tool Kit Seperate Free-Spinning Wheel Lock Bolt Outer Collar & Removing Inner Spline Bolt

This tools help removing a spinning ring wheel lock bolt when stuck from being free-spinning outer collar, rounded, stripped and/or the key is broken or missing. Unable to remove wheel lock bolt with normal wheel lock socket. Grinding, drilling and welding will usually result in damaging the wheel. The removal is very difficult, time consuming and expensive.

With this Wheel Lock Removal Tool allows you to remove the high security with spinning rings wheel lock bolt in a few minutes, without the need of key and leaving no damage to the wheel.

Remove the spinning collet from the wheel bolt with the slide hammer. Then use the spline removal tool to remove the bolt from the rim.

Avoid the expensive wheel repair or even replacement, saving time, and money.

**To use this kit required some hand tools slide hammer with 5/8" 18 thread adapter and breaker bar with 17mm socket. Do not recommended use with electric or pneumatic air impact tool, this would damage the spline tool. applied WD40 to the wheel lock bolt to disolve rusted or dirt on the thread. This tool cannot removed dead lock bolt which required other tool to removed.

Attach the slide hammer to the Wheel Lock Removal tool to seperate the collet from the wheel lock bolt then use Spline removal tool to remove the wheel lock bolt with the 17mm socket.

This tool will not remove dead lock bolt. Recommended

package Included

Wheel Lock Removal free-spinning outer Collar
Pin
Wheel Lock Removal Spline Tool
23" slide hammer
17mm socket with sleeve



New !

Fast shipping !