Choose from 5 to 100
Minute Hand Length:
17-3/4" from the mounting hole to the tip. The total size is 20-5/8" end to end.
Hour Hand Length:
13" from the mounting hole to the tip. The total size is 15-7/8" end to end.
The hub is 3-⅜” deep and 1” long.
It includes 3 small Phillips screws and a small Phillips screwdriver.
The back plate has a built-in compartment for the battery.
It can be painted any color, just be sure to put a coat of primer on before so the paint sticks to the hub.
You choose between 3 threaded shaft lengths. (The options are listed below)
The motor is a silent high torque, it does not tick or step gear, it is a quiet continuous motor. 9/16"/ threaded shaft, total length is 15/16" including
hand stem.
We also have 1/4" and 7/16" in place of the furnished 9/16". if so please message us.
The motor case is 2-1/8" sq x 5/8" thick.
*3-Year Warranty
*Motor requires 1 AA battery (not included)
*Necessary hardware is included
*A photo of the assembly will be attached to your order confirmation order.
NOTE ON MEASURING:
Shaft length is a brass threaded portion that must pass through your clock face, leaving a couple of threads to mount the retaining nut.
(ex., if working with a 1/4" tile as your clock face....then order a 7/16" or 9/16" threaded shaft)
MEASURING DIAL FOR HAND SIZE: measure from the top of #12 to the bottom of #6, and divide it in half. This will give your approx. minute hand length
I accept paypal, money orders and personal checks
I sell stateside only. Please message me for worldwide
I do offer combined shipping for multi items to save on shipping charges in checkout
For larger volume see my other listings or email me
Minute Hand Length:
17-3/4" from the mounting hole to the tip. The total size is 20-5/8" end to end.
Hour Hand Length:
13" from the mounting hole to the tip. The total size is 15-7/8" end to end.
The hub is 3-⅜” deep and 1” long.
It includes 3 small Phillips screws and a small Phillips screwdriver.
The back plate has a built-in compartment for the battery.
It can be painted any color, just be sure to put a coat of primer on before so the paint sticks to the hub.
You choose between 3 threaded shaft lengths. (The options are listed below)
The motor is a silent high torque, it does not tick or step gear, it is a quiet continuous motor. 9/16"/ threaded shaft, total length is 15/16" including
hand stem.
We also have 1/4" and 7/16" in place of the furnished 9/16". if so please message us.
The motor case is 2-1/8" sq x 5/8" thick.
*3-Year Warranty
*Motor requires 1 AA battery (not included)
*Necessary hardware is included
*A photo of the assembly will be attached to your order confirmation order.
NOTE ON MEASURING:
Shaft length is a brass threaded portion that must pass through your clock face, leaving a couple of threads to mount the retaining nut.
(ex., if working with a 1/4" tile as your clock face....then order a 7/16" or 9/16" threaded shaft)
MEASURING DIAL FOR HAND SIZE: measure from the top of #12 to the bottom of #6, and divide it in half. This will give your approx. minute hand length
I accept paypal, money orders and personal checks
I sell stateside only. Please message me for worldwide
I do offer combined shipping for multi items to save on shipping charges in checkout
For larger volume see my other listings or email me
