$34.99
Add to Cart
Milwaukee pH600-BOX Digital pH Pen
DIGITAL. SIMPLE. COMPACT.
Over 200,000 people have relied on the Milwaukee pH600AQ compact pH pen tester to move from difficult to use and interpret pH strips to digital testing.
SUMMARY
The Milwaukee pH600AQ compact pen tester is specifically designed to help maintain aquariums and aquaculture. Keeping the proper pH improves results for aquarium fish and quality in a range of fish raised in aqulculture.
Use digital accuracy to keep pH in your target range for better results.
WHAT PEOPLE ARE SAYING
"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
DESIGN FEATURES
Fast, accurate results with digital LCD readout
Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes
Cap to protect the pH sensor and keep it wet when stored upright
Low power demand for extended battery life (batteries included)
USE AND CARE
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!
Here are our top four tips.
1. Always store upright with the cap full of buffer or storage solution MA9015 not water.
2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Pen in the sample for a faster result.
SPECIFICATIONS
pH range: 0.0 to 14.0 pH
Resolution: 0.1 pH
Accuracy: +/- 0.1 pH
Typical EMC Deviation: +/- 0.2 pH
Calibration: Manual, 1 Point
Environment: 32 F to 122 F, 95% RH
Approximate dimensions: 6 x 1.2 x 0.95 inches
Weight: 3 ounce
Battery Life: 700 hours
Warranty: 1 year
Over 200,000 people have relied on the Milwaukee pH600AQ compact pH pen tester to move from difficult to use and interpret pH strips to digital testing.
SUMMARY
The Milwaukee pH600AQ compact pen tester is specifically designed to help maintain aquariums and aquaculture. Keeping the proper pH improves results for aquarium fish and quality in a range of fish raised in aqulculture.
Use digital accuracy to keep pH in your target range for better results.
WHAT PEOPLE ARE SAYING
"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
DESIGN FEATURES
Fast, accurate results with digital LCD readout
Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes
Cap to protect the pH sensor and keep it wet when stored upright
Low power demand for extended battery life (batteries included)
USE AND CARE
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!
Here are our top four tips.
1. Always store upright with the cap full of buffer or storage solution MA9015 not water.
2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Pen in the sample for a faster result.
SPECIFICATIONS
pH range: 0.0 to 14.0 pH
Resolution: 0.1 pH
Accuracy: +/- 0.1 pH
Typical EMC Deviation: +/- 0.2 pH
Calibration: Manual, 1 Point
Environment: 32 F to 122 F, 95% RH
Approximate dimensions: 6 x 1.2 x 0.95 inches
Weight: 3 ounce
Battery Life: 700 hours
Warranty: 1 year
