ZZPerformance 1.4L Titanium Retainers 72# Valve Springs Chevy Sonic Cruze Spark

ZPerformance 1.4L Titanium Retainers 72# Valve Springs Chevy Sonic Cruze Spark-BRAND NEW THIS ITEM IS BEING LISTED AND SHIPPED BY ME. THE FOLLOWING DETAILS PROVIDED BELOW IS FROM THE COMPANY THAT OFFERS THESE AT ZZ PERFORMANCE ZZPerformance 1.ZL Turbo 72# Valve Springs and Titanium Retainers Combo For 1.4L Turbo engines on Chevy Sonic, Cruze, Trax, Encore, etc. The Sonic and Cruze comes with very light valve springs from the factory. Whenever you bump the rev limiter and/or boost the valve springs will start to float. This is bad for a few different reasons, it is hard on the valves/valve seats themselves, and it reduces power because the valves are not opening and closing properly like they should. When you install our ZZP valve springs, you will be able to rev the car out further and make power power up there. The stock valve springs are measured at 42# and these are 72#. We highly recommend bringing the car to us for the install, we designed a tool that will avoid having to remove the head to install them. About our Titanium Retainers: In out quest for continually pushing the platform, we found ourselves at the point where even with our upgraded springs, we were fighting valve float at high boost and lift levels. After researching the issue, we found that the reused stock retainer is a significant portion of the valve/retainer/keeper assembly's mass. As ZZP does, we immediately began working on the solution. These Titanium retainers are made to directly replace the stock retainers on our upgraded 1.4 valve springs, and reduce reciprocating mass by as much as 17%! This results in a significant improvement in valvetrain stability and a much larger window before valve float occurs, matching perfectly with our camshaft package