Clamp Design : Clip on the tap, easy to use. Suitable for faucet pipe with thickness between 18mm and 25mm. NOTE: This kitchen sponge holder ONLY fit for round faucets with a diameter of 0.71-0.98 inches, not fit for other size round faucets or square faucets. The mat accessories can adjusting the tightness.Upgrade Bathroom Rack Kitchen Sink Gadgets: Top Hook Design 360 Degree Rotation to Move Up and Down. No drilling, screws or glue required and can be easily removed without leaving marks or sticky residue.Super Drainage Speed: The extra wide distance at the bottom of the sponge holder allows water to drain quickly, keeping brushes, towels, etc. dry.Multi Function: This faucet rack can be used as sponge rack, dishwasher rack, hand sanitizer rack, etc. Also be used as a bathroom storage holder, shampoo, razor, soap rack and so on.Easy to Install: Before fixing, you can choose the firmware according to the diameter of the faucet water pipe. If the faucet is relatively thin, you can use all the firmware. If the faucet is thick, you can remove the internal firmware and fix it directly. The diameter of the faucet water pipe is 0.71'' -0.98''. Product Description Sponge Holder for Kitchen Sink Sponge Holder Over Faucet If you don't want the drain rack to take up space in your sink, you also want to adjust the position of the drain rack at any time. Then this faucet drain rack will meet your needs. kitchen sink caddy Step 1 Firmly snap the clips into the upper and lower steel bars at the edge. Step 2 Select the gasket according to the thickness of the faucet, and put the gasket into the slot. Step 3 Align the card slot with the water pipe, adjust it to a suitable position, and fix it on the faucet. Step 4 Tighten the fixing cover and the installation is complete. sink sponge holder Track Page Views WithAuctiva's Counter