$24.00
Add to Cart
Fingerboard Radius Fixture
Only 1 available
Details
Shipping: US-Mainland: free (more destinations)
Sales Tax: check
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
These Drawings enable you to make a tool developed to radius a fingerboard quickly and accurately using your router. They are accurate and easy to follow. Each piece is detailed separately. A full size pattern sheet is included with 7.25, 7.5", 9.5" and 10" to 24" radius outlines in 2" increments. All hardware is listed and sources described in a bill of material. The tool is easy to make, using Baltic Birch plywood, hardwood and a few basic hardware items.
Use of the fixture is fully explained on the drawing. There are three sheets in the set measuring 11" x 17".
You can accurately radius your fingerboard in just a few minutes using your router to nearly any radius or combinations of radii.
Minor sanding is required after glue-up to the neck. Pictured is an ebony fingerboard with a 16" radius at the nut end and 24" radius at the body end. The entire process took less than 4 minutes.
Use of the fixture is fully explained on the drawing. There are three sheets in the set measuring 11" x 17".
You can accurately radius your fingerboard in just a few minutes using your router to nearly any radius or combinations of radii.
Minor sanding is required after glue-up to the neck. Pictured is an ebony fingerboard with a 16" radius at the nut end and 24" radius at the body end. The entire process took less than 4 minutes.
