CTI Dental Implant Pointer For Detecting The Implant Location Under The Gum 50 g

CTI Dental Implant Pointer For Detecting The Implant Location Under The Gum 50 g Operating the Unit:1. Turn the Unit on by inserting the Sensor so that the notice “TOP SIDE” faces in the same direction as the logo “CTI” on the Battery Cover. 2. The bottom side of the Sensor should be gently clasped to the gum in the area intended for the implant. 3. The Sensor nedd to be slowly moved along the gum, keeping it in constant contact with the gum. 4. When the LED turns from Blue to Green, the sensor is close enough to the Implant. 5. Keeping the Sensor exactly above the found Implant, insert the tip of the Marker into the hole in the center of the Sensor and mark the Implant position by pushing the Marker into the gum, simultaneously twisting it several times for better marking. 6. Reset the last found implant parameters by bringing the Sensor close to any metal object such as the Marker Handle and keep it attached to the Handle until the indicator switches from Blue to Yellow, then take it away. The LED will switch back to Blue, indicating that the Unit is ready to be used again. After Using the Unit1. Turn the Unit off by extracting the Sensor.2. Remove the Protective Cover.3. Twist off the Marker from the Marker Handle. 4. Dispose of the used Sensor, Protective Cover and Sensor. Sterilization1. The Marker Handle should be autoclaved at 135C (249.8F), for a minimum of 4 minutes with a sterilization pouch. Minimum Drying Time after sterilization: - 10 minutes. 2. Sterilize the surface of the Unit by wiping it with a piece of gauze dampened with Ethanol for Disinfection (Ethanol 70~80%). Wring the gauze out to make sure it is not too wet. Storage in the clinicKeep the Unit, the sterilized Marker Handle and the Disposable Sets in the closed Kit Box. Working LifeThe Working Life of this equipment is at least 6 years from the date of shipment, provided it is regularly and properly inspectedand maintained. Technical Specifications:Power Source - 1.5 V (One AA Alkaline Battery)Rated Current max - 0.04 APower Consumption max - 0.06 VADimensions - 170 mm :: 24 mmWeight - 50 g The kit is open and one tip is missing Shipping:We ship your order using Israel registered post within 24 hours after payment is cleared. We provide tracking number allowing you to trace your order at Israel Post Web Page Payment: We preferred PayPal as our main method of payment.But we also accept all major Credit Cards. Contact details: If you have any questions, please contact us through eCRATER message system. Return policy: Refund or replacement request is available only within 30 days after the item receivedThe Buyer is responsible for shipping and handling costs related to returning the item. If a defective product was received, please do not hesitate to contact us within 7 days, we will respond within 24 hours. If purchased item are not received within 30 days after payment made, we will be happy to post another one or offer a full refund. General Note: In full compliance with eCRATER Medical Drugs and Devices policy, we are including following required information: Israel Tel: +972-09-832-3372 The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Please buy just if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.