The metal-coating additive component is intended for use in engine oils of any type.

significantly improves the detergent properties of motor oils. Compatible with all types of motor oils, does not change their viscosity and other physicochemical properties;

protects metal friction surfaces with a copper film, partially restoring worn-out working surfaces of parts in friction pairs;

helps to improve the temperature regime, dynamic, economic and environmental characteristics of the engine;

increases the service life of the internal combustion engine;

does not affect the engine seals.
Attention! Before use, energy drinks must be warmed to room temperature and shaken!
The contents of the package are designed to handle an engine with an oil system of 3 - 5 liters.
Mode of application:

pour the contents of the package into the oil system of the engine warmed up to operating temperature

let the engine run for 5 - 10 minutes at idle speed

continue to operate the vehicle in normal mode

designed for the entire life of the engine oil

Auto-energetic flushing for all types of internal combustion engines (Doy-pack, 100 ml). Designed to remove old varnish deposits from the engine lubrication system. Recommended as an initial step before using Cupper® engine oils or CUPPER® metal cladding component for all types of engine oils. Application: The contents of one bottle are designed for an engine with an oil system volume of 3-5 liters. Pour the estimated volume of the contents of the bottle into the oil filler hole of the engine warmed up to operating temperature. Start the engine and let it idle for 3-5 minutes. Change the engine oil after 1-1.5 thousand kilometers. For greater efficiency, we recommend using Cupper® engine oil after applying the flushing additive or adding CUPPER®® additive to the standard oil for all types of engine oils. Advantages: Significantly increases the detergent properties of engine oil; all old deposits are gradually washed away to a pure metal. Restores the thermodynamics of the engine. Note: Attention! Before use, energy drinks must be warmed to room temperature and shaken! The metal-cladding component "CUPPER" ® is compatible with all types of transmission oils, does not enter into chemical reactions with them and does not change their viscosity and other physicochemical properties.