$21.00
Add to Cart
Programming Cable USB-SC09 USB SC09 To RS422 Adapter Suits For Mitsubishi FX PLC
Mitsubishi PLC Programming Replacement Cable USB SC09
USB Cable for Mitsubishi MELSEC FX and A series PLC. 8 pin DIN connector and DB-25 connector. Designed for computers without a serial port. This cable is an OEM replacement and not made by Mitsubishi.
Introduction
USB-SC09 is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates detail transceiving status.
Functions
Support USB-SC09 operating system: Windows2000/XP/ 7 / 8/ 9 /10 (WinNT4/95/98/Me/DOS not support )
Support USB-SC09 programming software version: FXGP / WIN V1.0,GPP V4.0, GX Developer V7.0 and above.
Fully compatible with USB V1.1 norms and USB CDC V1.1
USB-bus powered, with current consumption of 50 mA
Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baudrate
Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd /even / no parity
Each PC only supports one USB cable programming
Working temperature: -20 ~ +75 DegC
Color: black
Package:
USB SC09 PLC Cable x 1 pc
USB Cable for Mitsubishi MELSEC FX and A series PLC. 8 pin DIN connector and DB-25 connector. Designed for computers without a serial port. This cable is an OEM replacement and not made by Mitsubishi.
Introduction
USB-SC09 is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates detail transceiving status.
Functions
Support USB-SC09 operating system: Windows2000/XP/ 7 / 8/ 9 /10 (WinNT4/95/98/Me/DOS not support )
Support USB-SC09 programming software version: FXGP / WIN V1.0,GPP V4.0, GX Developer V7.0 and above.
Fully compatible with USB V1.1 norms and USB CDC V1.1
USB-bus powered, with current consumption of 50 mA
Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baudrate
Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd /even / no parity
Each PC only supports one USB cable programming
Working temperature: -20 ~ +75 DegC
Color: black
Package:
USB SC09 PLC Cable x 1 pc