TWO (2) New Light Weight Molded Hard Plastic T-Bar Knobs For Most Conventional & Spinning Reels. Handle Blank are NOT Included. Complete Handles (Knob & Handle Blank) are also Available in my products & in my eCRATER Store. To attach the new T-Bar knob to the handle blank, remove the 2 small phillips screws and face plate from the top of the knob. This will expose a slot in the pin for a screw driver. Unscrew the phillips screw from the bottom of the knob using a second screw driver from the top of the knob. Leave the washer on the exposed pin. Use blue Loctite 242 inside the pin when attaching the pin to the handle blank to secure the screw. Attach the Philips head screw thru the handle blank into the knob. With the normal screw driver inserted into the top of the pin to prevent rotation, tighten with both screw drivers. Then replace the face plate and 2 small screws.Mounting Screws May Be LEFT HANDED! If Needed, Installation Notes Available Upon Request Sales Tax: CA Residents Add Sales Tax. Local Pickup: Local pick-up can be arranged. Payment: Payment is by PayPal only. Please make your payment without receiving an invoice as the shipping process is keyed on and commences with the receipt of your PayPal payment. If you purchase several items, you may request an invoice prior to payment. Feedback: Feedback will gladly be left upon receipt of your feedback.