High temperature resistance: up to +110 ° С
Reliable and durable adhesion
Diverse applications in different conditions
Dries quickly
The design of the spray head allows you to choose the shape of the spray, as well as adjust the spray angle
Wide range of possibilities in various working situations due to optimal settings and application options
After solidification is transparent
Does not change the color of the bonded parts
Silicone free
Mode of application
Thoroughly clean the surfaces to be bonded, then spray with Power Plus adhesive. Spray on porous surfaces until saturation from a distance of 15–25 cm. Allow the adhesive to dry for 5–15 minutes before aligning the surfaces to be glued. The contact time is approximately 45 minutes.

Application area
Suitable for bonding the following materials: fabric, polyester foams, foam rubber, insulation materials, roof cladding, felt, cardboard (together or on rubber), aluminum, stainless steel, copper, brass, steel / iron, ABS, fiberglass, rubber / foam , hard foam, polycarbonate, polyurethane, wood (MDF, chipboard), laminated panels (Resopal, Ultrapas), cork, HPL, leather (depending on the fat content), etc. Also suitable for bonding polyethylene films (eg waterproof films inside car doors) and for covering and packaging applications.

Attention!

Not suitable for bonding soft PVC, PVC films, PMMA, artificial leather, vinyl, chipboard edges and polystyrene. After use, invert the can and completely blow out the spray head.