Atomic metal conditioner Maximum with revitalizant 1 Stage

Metal conditioner is designed to protect engine parts during vehicle operation. This innovative new generation product combines the best qualities of the third generation revitalizants and a two-phase metal conditioner.
The effect obtained from the use of the XADO AMC Maximum Atomic Metal Conditioner can be reduced by friction losses of the "tired" (worn out) transmission unit. Therefore, it is advisable to use two drugs in parallel: XADO AMC Maximum Atomic Metal Conditioner for the engine and XADO 1 Stage Transmission Revitalizant for transmission units.

This will positively affect fuel economy (up to 5-7%), reduce the overall level of noise and vibration of the car, and increase its reliability. This application is especially effective on all-wheel drive vehicles: with simultaneous (parallel) processing of the engine, gearbox, transfer case, differentials.

RF (Revitalization factor) is an indicator of the effectiveness of protection and restoration of the engine from wear.
RF = 100, means that the engine, as a result of the use of a metal conditioner, has gone through a full revitalization cycle. Engine parts are fully remanufactured and protected from wear for 100,000 kilometers.
Application
Before using the product, the temperature must be at least + 25 ° C.
Preheat the engine to operating temperature.
Shake the can well.
Pour the contents into the engine through the oil filler hole.
After that, start the engine and ensure its operation for at least 3-5 minutes at idle speed.

Notes
The conditioner is compatible with all types of engine oils.
The product is equally effective for diesel, gas and gasoline engines of trucks and cars, where the volume of the oil system is from 3 to 5 liters.
Recommended for reuse after 100 thousand kilometers.
Revitalization occurs within 1-1.5 thousand kilometers, which is why it is not recommended to change the oil during this period.
The revitalizant in the product is contained in granules, which completely dissolve at the operating temperature of the oil.
To ensure further protection of engine parts against wear, we recommend using AMC HighWay metal conditioner and XADO Atomic Oil.
Benefits
Increases compression in cylinders and evens out its indicators
Reduces fuel consumption
Restores and compensates for the current wear on the surface of parts
Reduces vibration and reduces noise
Increases the pressure in the oil system to the nominal
Ensures engine protection against wear for 100 thousand kilometers
Increases power and increases engine throttle response
Improves the lubricating properties of the oil
Creates an effective system of active protection of engine parts from loads and overheating
Increases engine resource