Thread lock one-piece Heat-resistant ThehertFIKs

It is used for sealing and fixing joints subject to high temperature loads and requiring disassembly only in case of major repairs. Reliably strengthens the threaded connection and prevents its self-loosening and loosening under vibration and temperature loads, as well as when exposed to the environment. It is polymerized in thread gaps without air access. The unscrewing moment on an loose screw pair is at least 30 Nm. Resistant to water, salts, antifreeze, any fuel and gas. It cures in 2 hours. The temperature range of operation of the repaired product is from -60 to + 250 ° C.
Method of application Clean the threads of rust, oil and dirt. Degrease and thoroughly dry the threads. Apply a small amount to the thread and spread over the entire surface. Tighten the connection completely. The fixer hardens in 2 hours, the final strength gains after 48 hours at a temperature of at least +18? C. If it is impossible to dismantle, it is necessary to heat the connection to 250-900 C using an industrial hair dryer or blowtorch.