Glue-cold welding universal quick action

Designed for emergency repairs of products from ferrous and non-ferrous metals, wood, ceramics, glass and most plastics, including in combinations with each other. It is also used to restore lost fragments of products from the above materials, operating at temperatures from -60 ºС to +150 ºС.

Mode of application:

The glued surfaces clean of dirt and rust, clean with sandpaper, degrease and dry. Cut the part of the rod necessary for volume and carefully mix both components with your fingers (you can wet) to obtain a uniform color of the mass. Apply the resulting mixture to the surface to be repaired and, if possible, squeeze and fix for 15 minutes. To smooth the surface and give it the necessary shape, use flat objects moistened with water.

ATTENTION! The pot life of the mixture is 5-7 minutes. at 20 ° C. Under conditions that ensure the removal of heat (thin layer, low temperature, etc.), the pot life increases, when heated, it decreases. The composition "sets" in 15 minutes at 20 ° C. At this time, mutual fixation of the connected parts is necessary. After 1-1.5 hours, the connection can be machined and loaded.