Description
Long-term flushing "Suprotek A-prohim" is designed to clean the internal surfaces of the engine from old deposits. Flushing belongs to the class of “soft” cleaners, for which a certain action time is required. That is why flushing must be added to the oil system approximately 200 kilometers before the planned oil change. This mileage and, accordingly, the engine operating hours will be enough for efficient, but at the same time gradual, safe cleaning. Rinsing sequentially dissolves contaminants with an oncoming oil flow, prevents the formation of lumps and clots suspended in the oil.
EFFECTS FROM APPLICATION
Flushing "Suprotek A-prohim" has the following actions:
Gradually dissolves deposits and contaminants in various components and mechanisms of the engine, prevents them from settling back in the oil channels, allows you to remove contaminants when draining the oil. This makes it easier to operate the engine, effectively clean the oil system when switching from one type of oil to another, extend the life of new oil, and therefore provide better engine protection.
With constant use (before each oil change) it is able to gradually dissolve carbon deposits and varnish deposits formed in the event of oil overheating, poor-quality combustion of fuel, breakthrough of exhaust gases into the crankcase. Cleans piston rings from soot, restores their mobility and fit. The consistent use of flushing for several cycles of engine oil, allows you to achieve the effect of sizing rings, especially if their mobility is still minimal. Restoring the normal operation of the piston rings increases and evens out the compression in the cylinders, which is critical for the uniform operation of the engine, complete combustion of the fuel, and, accordingly, reduction of its consumption. Normally functioning piston rings also reduce the likelihood of gas breakthroughs in the engine crankcase, leading to dilution and oxidation of the oil, decomposition of additives in it.
It cleans the hydraulic lifters, restores the mobility of the plungers, which leads to the elimination of a characteristic knock when starting the engine and during its operation.
Effectively cleans the crankcase ventilation system, restores the PCV valve.
Recommended for continuous use before each oil change.