Three-level fuel system cleaner ML100 DIESEL, 3x120 ml


The ML100 DIESEL three-level fuel system cleaner was developed on the basis of the legendary ML102 injection flushing agent. The patented LAVR DSP / DET ™ components make the ML100 DIESEL fuel additive as effective as the injectors flushing procedure in a car service. With this preparation you can independently clean the injection system safely and with high quality. The drug is used at ambient temperatures above -5 ° C.

REPLACES FORCARE WASHING IN AUTOSERVICE

Removes up to 100% of contamination and completely refreshes the nozzles.
Reduces fuel consumption.
Suitable for all types of diesel injection systems.

Composition of high concentration. To avoid precipitation, use at ambient temperatures above -5 ° C.

1. Fill the No. 1 compound into the tank before refueling with 30-40 liters of diesel fuel. A slight increase in the concentration of the composition in the fuel is acceptable.

2. Refill the car to better mix the composition with the fuel.

3. It is recommended to operate the car in urban traffic mode.

4. Run the fuel up until the “low fuel” indicator lights up. Repeat the procedure with compositions No. 2 and No. 3.

It is recommended to carry out a three-level cleaning of the fuel system every 20-30 thousand kilometers.

THE PREPARATION AND CONCENTRATION OF THE PREPARATIONS ARE SELECTED PERFECTLY. APPLY STRUCTURES # 1, # 2, and # 3 CONSISTENTLY AND RECEIVE A QUALITY UPDATE OF THE INJECTION SYSTEM
Composition number 1 - will prepare the fuel system for cleaning and safely remove loose dirt, soften deposits on valves and injectors.

Composition number 2 - removes lacquer and resinous deposits.

Composition number 3 - will complete the procedure for high-quality cleaning of injectors and valves.