BG Compression Engine Performance Restoration EPR / BG MOA

The fast-acting chemical formula BG 109 dissolves accumulated deposits, puts them in suspension and then easily removes them from the oil system when changing the oil.
BG MOA Advanced Formula Engine Oil Conditioner is formulated to enhance engine oil and extend its life. The unique blend of additives that make up the product maintains engine cleanliness and performance under high-load conditions.

BG Compression Engine Performance Restoration EPR

High operating temperatures and extended service intervals have an adverse effect on engine oils. Constant thermal and oxidative processes lead to depletion of the additive package in engine oil. Overheating of the oil leads to an increase in viscosity, and the formation of deposits in the oil system. A large amount of deposits can cause coking of compression rings, and therefore increase fuel consumption, reduce power, increase the amount of harmful emissions and oil consumption.

Direct fuel injection engines are more prone to the early formation of deposits on the piston head, inlet channel, atomizer nozzles, and intake valves. Already after 32,000 km of the vehicle™s run, deposits in the engine with direct fuel injection can lead to a significant increase in fuel consumption and unstable engine operation.


The revolutionary technology of "clean rings"!
High operating pressures and temperatures increase the requirements for servicing diesel engines. Losses in compression due to deposits on the piston rings contribute to gas breakthrough and leakage, loss of power and fuel economy.


The fast-acting chemical formula BG 109 softens and removes sediment from piston rings in just 10 minutes!
The restoration of the compression and oil scraper rings leads to the restoration of compression and eliminates the ingress of oil into the combustion chamber.
BG 109 cleans all oil channels, normalizes the performance of other engine components (hydraulic lifters, VVTI couplings, turbochargers, etc.) controlled by oil pressure.
BG 109 restores fuel economy and power, is safe for gaskets and other engine components.
Works great with diesel engines and direct fuel injection engines.

Benefits:
Removes insoluble deposits
Restores compression
Reduces the amount of harmful impurities in the exhaust
Reduces oil consumption by restoring piston ring function
Improves overall engine power and efficiency
Safe for gaskets and other engine components

Applicable:
Heavy duty protection
Flushing the oil lines
Flushing the variable valve timing system
Flushing the crankcase ventilation system
Raskoksovka of compression rings
Removal of oil scraper rings
For maximum effect, it is recommended to use the complex with other products and on professional equipment as part of BG services:
Service oil system of gasoline engines
Diesel Engine Oil Service


Mode of application:

For 4-5 liter oil system:

Check oil level; if the level is low, add to the mark. For greater efficiency, it is recommended to drain dirty, used oil, and fill in with flushing (intermediate) oil instead.
Warm up the engine to operating temperature.
Add a can of product (325 ml) to the old used or flushing (intermediate) oil.
Set engine speed to 1200-1500 rpm. Let the engine run for 15-20 minutes.
Turn off the engine. Change oil and filter.
For optimum engine performance and long engine life, add BG 115 MOA to the oil with each change. Do not use on heavily soiled engines!
For an oil system of 6-9 liters: Add two cans (325 ml).

For an oil system with a volume of 10-15 liters: Add a canister (946 ml).



Regulations and standards of use:
Recommended for every engine oil change. One can of 325 ml. designed for 4-5 liters of old oil.


BG MOA
Modern conditions of car operation in the city cycle (warm-ups, start-stop, short trips, extended interval between oil changes) and high operating temperatures lead to the rapid depletion of the required additive package in motor oil. This leads to the accumulation of more unburned fuel and other combustion products in engine oil, which is the reason for the rapid oxidation of engine oils. Oxidation causes thickening of the oil and the formation of deposits in the crankcase, oil filter, oil channels and other critical internal surfaces of the engine.

The BG Advanced Formula MOA® engine oil conditioner is designed to increase engine oil performance (synthetic and mineral) and extend its life.
The product prevents the oxidation and viscosity increase of the engine oil even under operating conditions at high loads.
Keeps compression rings, hydraulic lifters, hydraulic tensioners and other engine components clean, ensuring long engine life, and reduces maintenance costs.
Great for use in a gasoline engine.
Compatible with synthetic and mineral motor oils.
Benefits:
increases the strength of the oil film
prevents oxidation and thickening of oil
prevents the formation of sediment and varnish deposits when driving in the urban cycle
protects against rust and corrosion
provides increased power and performance
reduces harmful emissions

Excellent long-term protection of engine parts against wear!

Used by:
Restoring the elasticity of the elements of the oil system of a gasoline engine
Restoring the elasticity of the elements of the oil system of a diesel engine
Engine oil protection
For maximum effect, it is recommended to use the complex with other products and on professional equipment as part of BG services:
Service oil system of gasoline engines
Mode of application:

For continuous engine protection add one can (325 ml) per 4-5 liters of engine oil for each oil change
Add to the crankcase in case of lower oil level to enhance its properties between replacements

BG Products is not responsible for excessive or improper use of the product. Carefully read the warnings and precautions when working with the product on the packaging.