Professional composition with a high content of active zinc (up to 99%), designed to protect against corrosion of the outer and inner surfaces of products made of black and any other metals. Can be used as an independent coating, and as an anticorrosive primer before painting all types of enamels. It is an indispensable tool for the protection of welds and the restoration of damaged zinc coatings. Provides passive (barrier) and active (cathodic) protection of metals that are most prone to external destructive factors. Significantly reduces the risk of undercoat corrosion. Can be applied to a rusty surface. It has good adhesion and hiding power. It is easily applied to hard-to-reach places, forms a thin, but firm and even coating on the ground surface, which has a high elasticity, resistance to abrasion, and is not sensitive to shock and vibration. Operation of the processed articles is allowed at a temperature from -60 ° C to +150 ° C.

Method of application The composition is applied on a pre-cleaned and degreased surface. Shake the bottle vigorously for 2-3 minutes before use. For best results, the composition should be applied at an ambient temperature of at least + 10 ° C. When applied to a rusty surface, remove loose rust with a metal brush. The composition is applied from a distance of 25-30 cm in 2-3 layers with intermediate drying for 30-60 minutes. Drying time at break at a temperature of + 20 ° C is at least 30 minutes. The total drying time at a temperature of + 20 ° C is at least 10 hours.[! mpn:VX-23000!]