Most states are free shipping 239-357-1853 Craig

FX650 Material Handler.

Multi use Topdresser-Material Handler spread sand from 6 ft. to 40 ft. use as a row mulcher or Material Handler to fill bunkers or smaller topdressers.

$48,600 FX650 6.5yd / Tractor Plug-In Hydraulics / Remote Hydraulic Controls / 4 Wheel Chassis. wteight 3600 lbs. Former Pequea Models.

$52,300 FX650 6.5yd / PTO Driven Hydraulics / Remote Hydraulic Controls / 4 Wheel Chassis. weight: 3600 lbs. Former Pequea Models.

The new FX650 Material Handler/Spreader boasts a wide variety of features to make it compatible for your application. The FX650 can not only move material to bunkers, irrigation and reconstruction projects, or serve as a tender for smaller topdressers, but it will also evenly spread all kinds of material up to 40 feet wide. This topdresser can carry over 6 yards of material, drastically cutting out labor and excess trips to and from your sand pile. The four large turf tires provide very low ground pressure and enable smooth and safe travel over uneven terrain. The box is fully welded 11 gauge steel with a urethane based paint to provide a maintenance free, long lasting finish that will look great for years. Wireless remote controls enable the operator to access all hydraulic controls from the seat of the tractor!

SPECIFICATIONS:

Drive: Tractor Hydraulic (6-10 GPM @ 1800psi required) or PTO powered hydraulic pump.
Hopper Capacity: 6 Cubic Yards Struck Level.
Hopper Dimensions: 31" x 108" at Bottom and flares to 72" x 108" at Top.
Hopper Construction: 11 Gauge Painted Box.
Frame Construction: 5" x 2" x .187 Structural Tubing.
Loading Height: 84"
Overall Width (including tires) 90"
Overall Length: 18 Ft. 4 inch.
Tire Size: (4) 33/15.50 x 16.50 Turf Tire.
Rear Delivery: Twin Spinner Attachment -8 ft. to 40 ft. Spread Width.
Side Conveyor: RH Delivery: 30-degree distribution range.
Cross Conveyor: 5 ft. – RH (loading) or LH (row mulching, trench fling).
Adjustment: Independent manual control of belt and spinner speed.
Metering Gate: Full manual adjustment from 0" to 15" (Optional Hydraulic).
Conveyor Belt: Textured Belt w/ center tracking groove.
Hitch: 20,000 lb. rating pin hitch.
Top Dressing Speed: 4-9 mph depending on conditions.
Transport Speed: Up to 19 mph empty.
Empty Weight: 3,500 lbs.

Payment can be made over the phone via Visa, MasterCard, American Express or Discover by calling 239-357-1853 Craig.