$17.00
On Hold
PIC Microchip PIC-P28 prototype board with components - ICD2, PICkit2, JDM...
More than 10 available, 2 sold
Details
Shipping: US-Mainland: $5.50 (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
PIC Microchip PIC-P28 prototype board with soldered components
With this board you can develop and prototype with any of Microchip's 28 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User button and status LED. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters. PIC-P28 supports both 3.3V low power and normal 5V operation.
FEATURES:
* ICSP/ICD connector for programming with any PIC programmer or debugging (EXTRA-PIC, JDM PIC, ICD2 or other),
* RS232 Tx, Rx interface with MAX232 IC
* DIL28 microcontroller socket
* Quartz crystall 20Mhz
* LED to RA0 through jumper
* user Button on RA5 port
* Reset button
* Power plug-in jack
*selectable +3.3V / +5V power supply voltage regulator
* Extension slot on every uC pin
* Grid 100 mils (2,54mm)
* GND bus
* Vcc bus
* Four mounting holes 3 mm (0,13")
* FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print .
* Dimensions 100x80 mm (3,9x3,15")
HARDWARE:
* PIC-P28 schematic
* TOP side component placement
* BOTTOM side component placement
Payments:
1) PAYPAL
2) Bank transfer (bank account in Germany)
3) Moneybookers
4) Money Order
5) Personal Check
6) all credit cards via Google checkout
With this board you can develop and prototype with any of Microchip's 28 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User button and status LED. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters. PIC-P28 supports both 3.3V low power and normal 5V operation.
FEATURES:
* ICSP/ICD connector for programming with any PIC programmer or debugging (EXTRA-PIC, JDM PIC, ICD2 or other),
* RS232 Tx, Rx interface with MAX232 IC
* DIL28 microcontroller socket
* Quartz crystall 20Mhz
* LED to RA0 through jumper
* user Button on RA5 port
* Reset button
* Power plug-in jack
*selectable +3.3V / +5V power supply voltage regulator
* Extension slot on every uC pin
* Grid 100 mils (2,54mm)
* GND bus
* Vcc bus
* Four mounting holes 3 mm (0,13")
* FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print .
* Dimensions 100x80 mm (3,9x3,15")
HARDWARE:
* PIC-P28 schematic
* TOP side component placement
* BOTTOM side component placement
Payments:
1) PAYPAL
2) Bank transfer (bank account in Germany)
3) Moneybookers
4) Money Order
5) Personal Check
6) all credit cards via Google checkout
UA, Kharkov region
