$13.00
Add to Cart
Namco EE280-20445 DC Cylindicator w/ cable
Only 1 available
Details
Shipping: US-Mainland: $12.00 (more destinations)
Sales Tax: check
Condition: Used
Returns: does not accept (more)
Namco EE280-20445 DC Cylindicator w/ cable
Namco EE280-20445 DC Cylindicator
Says: " EE280-20445
PROBE: 1.025 395 "
Another side says: " DC CYLINDICATOR
MAX. PRESS. 1500 PSI
READY SCP MODE FLASHING LED TARGET
INTERNALLY SHORT CIRCUIT PROTECTED
PROBE MUST BE MOUNTED IN GROUNDED CYLINDER ENCLOSURE TYPE 1, 12, 13 "
It has a yellow cable coming out of it and the cable says:
BRAD HARRISON AWM 2661 22 AWG 3/C 105C 300V "
There is a manufacturer tag on the cable and some parts are markered out but it also says: " 951005a 300 VOLTS 3 AMPS "
This one is sort of in the Namco catalog :-)
Using the numeric index in the Namco catalog, it leads to a page that is " Tandem Low-Profile Power Clamp Sensor Kit"
Although the number was in the index and listed this page for the number, I did not see this exact number on the page. There are " Low Profile Cylindicator Sensor with "pigtail" interconnect" which MIGHT be what this is but it has another number.
Meanwhile let me tell you what is says about the "Tandem Low-Profile Power Clamp Sensor Kit"
According to the Namco catalog: " Tandem Low-Profile Power Clamp Sensor Kit
The new Namco LP2 (TM) Tandem Low Profile Power Clamp Kit is an adaptation of our successful Low Profile Cylindicator (R) sensor. This new version reduces the cabling necessary by 50 % when two sensors are required on an air or hydraulic cylinder. The system consists of a New Low Profile Cylindicator sensor specially constructed as a common wiring point. Cabling is brought to the Master unit, then the built-in cable from the Master unit is connected to a standard Low Profile Cylindicator sensor. This eliminates 50 % of the wiring density and labor required as compared to "conventional" practices."
" Applications: Patented Weld Field Immune circuitry permits application within one inch of resistance welder tips carrying 20,000 Amperes. This system is ideal for end-of-stroke detection on hydraulic or pneumatic clamping cylinders in automotive assembly, metal fabricating, and general automated welding applications. "
It is untested so it will be an as is sale.
Namco EE280-20445 DC Cylindicator
Says: " EE280-20445
PROBE: 1.025 395 "
Another side says: " DC CYLINDICATOR
MAX. PRESS. 1500 PSI
READY SCP MODE FLASHING LED TARGET
INTERNALLY SHORT CIRCUIT PROTECTED
PROBE MUST BE MOUNTED IN GROUNDED CYLINDER ENCLOSURE TYPE 1, 12, 13 "
It has a yellow cable coming out of it and the cable says:
BRAD HARRISON AWM 2661 22 AWG 3/C 105C 300V "
There is a manufacturer tag on the cable and some parts are markered out but it also says: " 951005a 300 VOLTS 3 AMPS "
This one is sort of in the Namco catalog :-)
Using the numeric index in the Namco catalog, it leads to a page that is " Tandem Low-Profile Power Clamp Sensor Kit"
Although the number was in the index and listed this page for the number, I did not see this exact number on the page. There are " Low Profile Cylindicator Sensor with "pigtail" interconnect" which MIGHT be what this is but it has another number.
Meanwhile let me tell you what is says about the "Tandem Low-Profile Power Clamp Sensor Kit"
According to the Namco catalog: " Tandem Low-Profile Power Clamp Sensor Kit
The new Namco LP2 (TM) Tandem Low Profile Power Clamp Kit is an adaptation of our successful Low Profile Cylindicator (R) sensor. This new version reduces the cabling necessary by 50 % when two sensors are required on an air or hydraulic cylinder. The system consists of a New Low Profile Cylindicator sensor specially constructed as a common wiring point. Cabling is brought to the Master unit, then the built-in cable from the Master unit is connected to a standard Low Profile Cylindicator sensor. This eliminates 50 % of the wiring density and labor required as compared to "conventional" practices."
" Applications: Patented Weld Field Immune circuitry permits application within one inch of resistance welder tips carrying 20,000 Amperes. This system is ideal for end-of-stroke detection on hydraulic or pneumatic clamping cylinders in automotive assembly, metal fabricating, and general automated welding applications. "
It is untested so it will be an as is sale.
