TOOLS -> SOURCE CODE ** --> FLY5D 13Pcs DIY Car Body Dent Removal Repair Tools Pops a Dent Ding Car Auto D DETAILS FLY5D 13Pcs DIY Car Body Dent Removal Repair Tools Pops a Dent Ding Car Auto D FLY5D pdr kitHow to use these paintless dent repair tools: 1.clean dent surface,If the dent so small and can't see where is it,use a dent board to check where is the dent. 2.put the glue to gun and heat,connect the power source and preheat for 5-10 minutes 3.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force. 4.immediately place pad in the center of the dent and hold until sticks 5.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. 6.After the glue cooling,use a dent lifter or T-bar to align and press the puller to pull up the dent. 7.If dent still exists, check with a Line board again, knock it slightly with a flattening hammer or pen 8.After finishing the dent,use the alcohol to clean the glue which on the car and the puller sets. Package list: 1pcs bridge puller 1pcs hot glue gun 3pcs yelow glue sticks 3pcs black glue sticks 3pcs white glue sticks 1pcs Instructions 1pcs Glue shovel 1pcs Empty alcohol bottle 1pcs dishcloth