FEATURES:
A shortcut to all your hardware problems! Just plug into the PCI or LTP+USB port and it will conduct a
complete hardware diagnostic test to detect the defective hardware in no time!
The purpose of the debug card is to make the difficult troubleshooting procedure easier and quicker.
This debugging card will assist any technicians (from novice to advance users) in accurately and conveniently locating their hardware problems faster, cutting down the troubleshooting time
drastically simply by displaying an easy to follow POST (Power On Self Test) code on its display.
Installation Guide:
Quick and easy to install into an open PCI or LTP+USB port of your PC motherboard.
Easy to read LED Display on the Display.
Will assist in revealing where problem is while troubleshooting.
Can be used to identify whether CPU or motherboard is defective.
Will help to determine if the memory is faulty.
Able to pinpoint whether the Video card is problematic.
5 LEDs that can hint whether power supply is failing.
Simple to follow POST Code table for problem description.
Drastically reduce troubleshooting time.
Helpful to both Novices and Experienced users alike.
SPECIFICATIONS:
INTERFACE/BUS: 32-bit PCI and LTP+USB.
INDICATORs:
dual 7bit LEDs: POST CODE present, Two dot display IRDY BIOS reading BIOS present and RESET signal
-12 LED : -12V power present
+12 LED : +12V power present
CLK LED : CLK signal present
FRAME LED: FRAME signal present
3.3V LED : 3.3V Standby power present
Please note: This practical tool necessary a good knowledge of the computer and the English language
This tester will let you quickly diagnose the cause of the failure of a motherboard. It can be used at home (PCI slot) or external (parallel port). This model allows you to break down the auto test of your motherboard step by step..
Compatible with the vast majority of motherboards using a BIOS type AMI, Award, Phoenix
Use of the controls: when the tester has got it's own test Phase, you can navigate using buttons 'Up' and 'Down', between all the steps that have built up the post, and obtain the test result at all stages. The first two numbers indicate the serial number of the test, and the last two the error code. In addition, when they are in a hurry at the same time, they allow the tester to make a self-test, ensuring you get to its functionality.
Method: Turn off all, remove all the parts of the motherboard, insert the tester into the parallel port, to connect to a USB port by the cable supplied, (or insert the tester on a standard PCI slot), then start, check out the diodes de Voltage and confirm the voltage, inspect the code and refer to the directions, or on the links at the bottom of the page, turn off all, insert components, then start, inspect the code and refer to the directions, or on the links stereos - please check details
Package
1 x 4-Digit Display Post Code Card
1 x USB Cable
1 x Manual