$48.50
On Hold
AdblueOBD2 Truck Plug Drive Ready Device Adblue DEF Nox Emulator OBD2 Adaptor
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
AdblueOBD2 Emulator Trucks Plug and Drive Ready Device by OBD2
AdBlueOBD2 adBlue/DEF and NOx Emulator via OBD2 Plug and Drive Ready Device!
Drive your truck without Diesel Exhaust Fluid!
Easy operation via OBD2, Especially for trucks!
AdblueOBD2 Emulator Trucks Description:
AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Top 5 Reasons to Get AdblueOBD2 EmulatorTrucks:
1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
Installation and Calibration Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses
Terminal - 15
Terminal - 30
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x adBlueOBD2 Emulator Box Interface
AdBlueOBD2 adBlue/DEF and NOx Emulator via OBD2 Plug and Drive Ready Device!
Drive your truck without Diesel Exhaust Fluid!
Easy operation via OBD2, Especially for trucks!
AdblueOBD2 Emulator Trucks Description:
AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Top 5 Reasons to Get AdblueOBD2 EmulatorTrucks:
1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
Installation and Calibration Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses
Terminal - 15
Terminal - 30
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x adBlueOBD2 Emulator Box Interface
HK, NT
