APC Switched Rack PDU 2G 5760VA 24-Output Power Distribution Unit AP8962

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.CableConnectivity Details Length:6 ftConnectivity Details Type:Power cableConnectivity Details Type:Serial cableHeaderBrand:APCCompatibility:PCManufacturer:APCModel:2GPackaged Quantity:1Product Line:APC Switched Rack PDUInterface ProvidedConnector Type:RJ-45Qty:1Type:Management (Ethernet)Connector Type:4 pin USB Type AType:Management (USB)Type:Management (RS-232)MiscellaneousColor:BlackColor Category:BlackCompliant Standards:cUL , FCC Part 15 A , ICES-003 , REACH , RoHS , UL , UL 60950-1Height (Rack Units):0Rack Mounting Kit:IncludedNetworkingRemote Management Interface:Ethernet , RS-232 , USBRemote Management Protocol:HTTP , SNMP , TelnetPower DeviceCircuit Protection:Circuit breakerForm Factor:Rack-mountableFrequency Required:50/60 HzInput Connector Qty:1Input Connector Type:Power NEMA L21-20Input Wiring:3-phaseMax Electric Current:20 AOutput Connector Qty:24Power Capacity (VA):5760 VAPower Device Features:Firmware upgradable , LCD display , LED indicators , Overload protection , Short-circuit protectionVoltage Provided:AC 120 VVoltage Required:AC 208 VPower Output Connectors DetailsConnector Qty:24Connector Type:Power NEMA 5-20Slot ProvidedType:NoneDimensions & WeightDepth:1.7 inHeight:70.5 inWeight:15.37 lbsWidth:2.2 inGeneralProduct Type:Power distribution unitSubcategory:Power distribution devicesCable DetailsIncluded Qty:1Form Factor:ExternalDimensions & Weight (Shipping)Shipping Depth:4.3 inShipping Height:79 inShipping Weight:20.9 lbsShipping Width:6.5 inMiscellaneous (CDW)Compatible With:APC NetShelter SX Enclosure with SidesTitleAPC AP8962 Switched Rack PDU 2G 24-Output Power Distribution Unit 5760VAConditionNew, open boxContentAPC AP8962 Switched Rack PDU ManufacturerAPC ModelAP8962 SKUPISD039 #1092http://www.compeve.com/Products/UPS/APC/AP8962/AP8962_compeve__1.jpg