This listing is for two filters.

Flow-Max industrial quality pleated sediment filters in all standard 10", 20", and big blue sizes. Available in 0.35 & 1 micron absolute (99.9% removal), and nominal ratings of 1, 5, 20, and 50 microns. Each cartridges is individually wrapped.

Premium filter cartridge with pleated design for high flow and long life. Removes sediment, rust, scale and particulate for greater clarity.

Flow-Max filter cartridges outperform wound, spun, melt blown, or resin bonded filter elements because these cartridges are pleated to provide increased surface area and longer life. Further saving are provided because the 100% synthetic filter media is cleanable down to 5 µ.

Cartridges rated for temperatures from 40 - 125 °F. Standard 10" and 20" cartridges have color-coded micron rating, end caps. Big Blue sizes have micron rating embossed in end cap.

Ideal for water filtration to remove Cryptosporidium and Giardia cysts. 0.35 µ nominal utilizes a multi-ply filter media for greater retention efficiencies and long life.

Flow-Max filter cartridges outperform wound, spun, melt blown, resin bonded, and other "depth" type filter elements because our cartridges are pleated to provide increased surface area and longer life.

Lower pressure drop is another significant advantage, using Flow-Max pleated cartridges, which allows for increased flow rates and use of smaller filter housings to reduce equipment costs.

Further savings are provided because our 100% synthetic filter media is cleanable, five micron and up, to lower cartridge replacement costs.

Flow-Max filter cartridges outperform other pleated elements because our higher-performance filter media is synthetically produced using 100% synthetic fibers, with no binders or additives to leave a residue or foam.

Our filter media is dramatically thicker than other products. For this reason, Flow-Max cartridges provide "depth" filtration for greater sediment removal, along with more surface area with our improved pleated design and media.

Filter Media Synthetic (100% cellulose-free)
End Caps Plastisol (PVC)
Center Tubes Polypropylene
Temperature Range 40°F - 140°F (4.4°C - 60°C)
Recommended Change Out 20-30 PSID*
Maximum Pressure Change 40 PSID*
Flow rate per 10" cartridge 3 GPM


Thank you for your visit.