Product Description: Color: 3 ml w/ UV LED Flashlight Octopus Glue is Liquid Optically Clear Adhesive (LOCA) specifically formulated for bonding outer touchscreen glass to digitizers in smartphone displays. Octopus Glue is compatible with all smartphone digitizers, LCDs and outer glass. Including: iPhone 4/4S/5/5S/6 Samsung Galaxy S/S2/S3/S4/S5/S6 Note I/II/3/4/5, etc. Recommended Usage Amounts: • iPhone 4/4s: 0.5ml • iPhone 5/5s: 0.7ml • iPhone 6: 1ml • iPhone 6 Plus: 1.3ml • Galaxy S: 0.8ml • Galaxy S2: 1ml • Galaxy S3: 1.3ml • Galaxy S3 mini: 1ml • Galaxy S4: 1.4 ml • Galaxy S4 mini: 1ml • Galaxy S5: 1.5ml • Galaxy S5 mini: 1.1ml • Galaxy S6: 1.5ml • Galaxy Note I/II/3/4/5: 1.7ml • LG Nexus 4: 1.3ml Octopus Glue Application & Curing: Apply recommended amount to center of digitizer in a line. Slowly place the glass lens onto the digitizer. Cure the glue with UV light for 3-5 minutes depending on your UV light source. Some high powered LED Lamps may cure as fast as 10 seconds, but some low power lamps may take up to 15 minutes. UV Flashlight: sit flush on glass for 1 minute , then move it to next uncured spot. Continue to cure the screen spot by spot until the entire screen is cured. See the product images for a demonstration. Please note excess glue can be pushed into your phone when you apply the glass. This is common with Samsung phones. The glue will not damage your phone, but the uncured leaking glue will seep for a couple of days until it is gone. Check out the Octopus Glue YouTube channel for demonstrations.