$59.99
On Hold
3X1 Enhanced HDMI® Switch w/ Built-In Equalizer & Remote
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Enjoy the easy switching life with this 3x1 Enhanced HDMI® Switch!
This switch allows you to connect three HDMI® inputs and direct them to a single HDMI output. It fully conforms to the the HDCP and includes support for all 3D formats.
Two of the inputs are in the traditional location on the back, while the third is on the front panel. This allows you to easily make temporary connections, such as from a phone or tablet, without having to reach behind and locate the plug by feel.
The switch includes a remote control, with an on/off button, three direct access buttons, and a pair of directional buttons to cycle between available inputs. Whenever a device is turned off, the unit automatically switches to the next device in the chain, the same as if you had pressed the "next" button on the remote or pressed the "Touch switch" on the front panel.
The switch also incorporates an amplifier, which automatically regenerates the HDMI signal to full strength, allowing you to use longer-than-normal HDMI cables from the input devices. An external 5VDC power supply is required and supplied with the unit.
Note: CableMart strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this switch, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.
This switch allows you to connect three HDMI® inputs and direct them to a single HDMI output. It fully conforms to the the HDCP and includes support for all 3D formats.
Two of the inputs are in the traditional location on the back, while the third is on the front panel. This allows you to easily make temporary connections, such as from a phone or tablet, without having to reach behind and locate the plug by feel.
The switch includes a remote control, with an on/off button, three direct access buttons, and a pair of directional buttons to cycle between available inputs. Whenever a device is turned off, the unit automatically switches to the next device in the chain, the same as if you had pressed the "next" button on the remote or pressed the "Touch switch" on the front panel.
The switch also incorporates an amplifier, which automatically regenerates the HDMI signal to full strength, allowing you to use longer-than-normal HDMI cables from the input devices. An external 5VDC power supply is required and supplied with the unit.
Note: CableMart strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this switch, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.
