Westell Wirespeed Ethernet/USB Modem B90-210015-04 Rev C

Specs
Model # B90-210015-04
Device Type External ADSL Modem
Speeds 8000 kbps down / 800 kbps up
Ethernet 1 x 10 Mbps ports
VPI/VCI 0/35
Router Yes DHCP Yes
Firewall Yes USB Yes
Wireless - Phone RJ11 Pass thru -
GUI Config Yes Telnet Config -

Info
Westell's WireSpeed Dual Connect ADSL NAT Router uses Point to Point Protocol over Etherne(PPPoE/A) data protocol to connect to a service provider. And LAN network setup is a breeze through the use of Network Address Translation (NAT) and Dynamic Host Control Protocol (DHCP). Because the WireSpeed ADSL Dual Connect NAT Router is viewed by the Internet as a single IP address, the IP addresses of the PCs on the LAN are hidden from the Internet, providing a simple and effective network security solution. WireSpeed Model 2100 also automatically assigns an IP address to each PC on the network, thereby removing the chore of local IP address management. Features: · Integrated firewall · PPTP/L2TP/IPSEC VPN support (Tunnel Mode) · Allows PPPoE shim on PC to be used simultaneously to run proprietary VPN Client Software · Port Forwarding · 'Always on' Internet access · Multiple users share single Internet connection · Network Address Translation (NAT) · Requires only one static (PPPoE/Aenabled) or dynamic IP from your ISP to serve multiple users on your LAN · Simple Web Interface · Isolates your LAN from the Internet - provides security since LAN IP addresses are not visible to the Internet · Automatic assignment of IP address and DNS information to all work stations on your LAN via DHCP · Uses Point to Point Protocol over Ethernet (PPPoE/A0 for connection to your service provider) · Easy set up and configuration via web browser · Hardware Reset switch · Software Upgradeable · Transparent learning bridge · Spanning Tree

downloads available at
http://www.dsldepot.com/dslmodem.asp?modem=6


Required 12VAC power adapter not included.

Used, untested. visual inspection appears in good condition.