Now you can know which of your X10-controlled appliances are turned on and which are turned off... automatically. Designed for use with X10-compatible computer interfaces and other devices that can generate the X10 Status Request command, these deluxe 2-way modules offer you all the capabilities of standard X10 Appliance Modules plus the added benefit of Status Request response. In addition to giving you the power to poll modules to determine their on/off status. It also lets your computer send a command to the module then check to see if the command was carried out. If not the computer can automatically send the command again.

These modules can save you money, too. Because they respond to X10 signals at 50mV (half the 100mV signal required by standard X10 Appliance Modules) they reduce the need for signal couplers and repeaters in larger X10 installations.

The 2-Way Appliance Modules plugs into any two-prong AC outlet to work with any two-pronged 110V appliance with a 15A or 1/3HP rating.

Instantly check the status of any X10 controlled appliance through your X10 computer interface

Increased sensitivity reduces need for repeaters

Works with most fluorescent & low-voltage lights