4x4 HDMI Matrix Switch Splitter Video Matrix Amplified (4 In/4 Out)

HDMI Matrix Switch is a full routing type 4-by-4 HDMI Matrix Switch, and any one of input sources is able to be displayed simultaneously on 4 displays. It offers HD video solution for super market; shopping Mall; HDTV, STB, DVD and projector factory; data control center; information distribution; conference room presentation; education and training, corporation show room, or home.

HDMI 1.3B certified and HDCP compliant;

Support full HDMI resolutions 1080p, 1080i, 720p, 720i and standard video format;

Multiple witching modes: IR remote control, operate manually or operate via RS232 port;

RS232 (serial port) programming software included on CD

With IR extender: enlarge remote control signal;

Rack-mountable: with mounting kit and screws;

Input video signal: 0.5-1.0 volts p-p;

Input DDC signal: 5 volts p-p (TTL);

Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master Audio;

HDMI video color format: deep color;

Maximum transmission distance: 10 meters by 28AWG cable; 15 meters by 26AWG cable(for further distance, HDMI extender is optional);

Power consumption: MAX. 36W

Product Dimension: 41x21x7 cm.

Power supply: 12V DC, 3A
Included in Package:
Matrix Switching Unit

IR Extender Cable with Sensor

RS232 (Serial Port) Control Software CD

Power Supply AC/DC

Remote Control (IR)

User Manual

Disclaimer: Due to the current state of HDMI technology (as it deals with HDCP), results using HDMI and/or DVI splitters can be mixed. Especially splitters which reply on the individual devices ability to negotiate a 3 way handshake. The problem is not all devices are programmed to deal with this properly and will sometimes default to an HDCP error state. To put it simply, some devices will consider a split of the signal to be a copyright violation, so it may decide that only one display should show at a time or may block the content entirely. This type of situation is considered to be a device compatibility issue and cannot be fixed short of a firmware update by the individual device manufacturers. Should you need to return this device due to an incompatibility issue, ALL retail packaging (box, instructions, cables if included, power supply) must be in NEW condition

TECH NOTE: If you are experiencing issues with this unit causing remote control function issues with your HDMI input device (e.g. - splitter causes DVD player to "stop" play), please check / disable any HDMI-CEC settings on your input device. HDMI-CEC allows 2-way communication between HDMI devices and can sometimes lead to compatibility issues, when switching inputs/output, in a splitter / matrix application. See HDMI input device manual for further information on HDMI-CEC. Also note that the resolution of your source devices (such as a BluRay Player, DVD, Cable Box, or Satellite Box) will be split equally to ALL TVs. If the each of the TVs support different "top" resolutions (such as one supporting 1080P, and the other onlt 720P), then your SOURCE SIGNAL must be set to the LOWEST of these all TVs resolutions.
EA0012