$499.00
Add to Cart
SecureGuard AC Powered Fire Alarm Strobe Light Battery Operated Nanny Camera
Product Description
This Fire Alarm is non-functional. A high
resolution pinhole camera allows this Fire Alarm to
see you, without you seeing it. Video is recorded
to DVR and sent to a SD card for storage. Depending
on the amount of motion, the SD card holds up to 4
days of recordings for each GB.
The Fire Alarm Nanny camera is battery powered.
The rechargeable battery inside can last up to 30 DAYS
on a single charge. The battery power consumption is
controlled by a PIR thermal sensor. The thermal sensor
detects body heat. When Body heat is detected the
battery power will activate. When body heat is
not detected the camera will switch to standby.
*Note* The 30 day estimate is for an average 20
minutes of activation per day. In a very busy
environment, the battery might be drain in 10 hours.
The camera inside the Fire Alarm uses motion
detection to control recording times. When Motion
is detected, a video clip will be made. When the
motion ends the video clip will be cut and saved
to the SD card. When the SD card is full the oldest
single video clip will be deleted automatically
to create a time loop.
The Fire Alarm is shipped with free 2GB SD card
that can hold up to 8 days of recordings. The free
2GB card can be upgraded to a large size easily by
selecting the upgrade option above. All you have to
do to setup this nanny camera is plug in the power
cord. The camera system will do the rest.
Specifications:
Model: ~ Fire Alarm / Non-Functional / Original Condition
Camera Lens: ~ Sony 4.3mm Color CCD Pinhole Lens
Quality: ~ 420 TV Lines
Minimum Lux (light): ~ 0.5 Lux
Resolution: ~ 640 x 480 DVD/MPEG2 Quality
Frame rate: ~ 12FPS
Recording Mode: ~ Motion Detection
Storage Mode: ~ SD and HCSD Cards
Size Supported: ~ 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Recording Cycle: ~ Auto-Recycle (deletes oldest clip when full)
Recording Capacity: ~ In most environments, up to 4 days per GB
Features:
~ All of the original functions of the Fire Alarm work.
~ The camera and recorder are powered by a rechargeable battery.
~ The viewing angle is 65 degrees wide and 55 degrees tall.
~ There are no beeps, no lights, no noise and no sign that a camera
or recorder is inside.
~ The video is easily playable on Windows Media Player and other
media players. (WMP, MPC, etc.)
~ We have a support page on our website where we offer SECURE
software downloads, answer common technical issues, installation
information and general support.
~ Technical phone support is available during our normal business hours.
Shipping:
We will try to ship orders the same day payments are received.
Payment received after 5PM EST will be shipped the following business day.
Average US delivery time is 2-5 days (Ground).
Website: www.atlanticelectronic.com
This Fire Alarm is non-functional. A high
resolution pinhole camera allows this Fire Alarm to
see you, without you seeing it. Video is recorded
to DVR and sent to a SD card for storage. Depending
on the amount of motion, the SD card holds up to 4
days of recordings for each GB.
The Fire Alarm Nanny camera is battery powered.
The rechargeable battery inside can last up to 30 DAYS
on a single charge. The battery power consumption is
controlled by a PIR thermal sensor. The thermal sensor
detects body heat. When Body heat is detected the
battery power will activate. When body heat is
not detected the camera will switch to standby.
*Note* The 30 day estimate is for an average 20
minutes of activation per day. In a very busy
environment, the battery might be drain in 10 hours.
The camera inside the Fire Alarm uses motion
detection to control recording times. When Motion
is detected, a video clip will be made. When the
motion ends the video clip will be cut and saved
to the SD card. When the SD card is full the oldest
single video clip will be deleted automatically
to create a time loop.
The Fire Alarm is shipped with free 2GB SD card
that can hold up to 8 days of recordings. The free
2GB card can be upgraded to a large size easily by
selecting the upgrade option above. All you have to
do to setup this nanny camera is plug in the power
cord. The camera system will do the rest.
Specifications:
Model: ~ Fire Alarm / Non-Functional / Original Condition
Camera Lens: ~ Sony 4.3mm Color CCD Pinhole Lens
Quality: ~ 420 TV Lines
Minimum Lux (light): ~ 0.5 Lux
Resolution: ~ 640 x 480 DVD/MPEG2 Quality
Frame rate: ~ 12FPS
Recording Mode: ~ Motion Detection
Storage Mode: ~ SD and HCSD Cards
Size Supported: ~ 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Recording Cycle: ~ Auto-Recycle (deletes oldest clip when full)
Recording Capacity: ~ In most environments, up to 4 days per GB
Features:
~ All of the original functions of the Fire Alarm work.
~ The camera and recorder are powered by a rechargeable battery.
~ The viewing angle is 65 degrees wide and 55 degrees tall.
~ There are no beeps, no lights, no noise and no sign that a camera
or recorder is inside.
~ The video is easily playable on Windows Media Player and other
media players. (WMP, MPC, etc.)
~ We have a support page on our website where we offer SECURE
software downloads, answer common technical issues, installation
information and general support.
~ Technical phone support is available during our normal business hours.
Shipping:
We will try to ship orders the same day payments are received.
Payment received after 5PM EST will be shipped the following business day.
Average US delivery time is 2-5 days (Ground).
Website: www.atlanticelectronic.com