$44.99
Add to Cart
Vintage Canon Power Winder A2 Fits Canon AE1 AE1 Program A1 Used Exc
product Wizard 2000 Listing Template - AW2KLOT#:13917Vintage Canon Power Winder A2 Fits Canon AE1 AE1 Program A1 Used ExcWe gladly ship to most countries!Email us for a QuoteVintage Canon Power Winder A2 Fits Canon AE1 AE1 Program A1 Used good condition.The battery compartment is and whole unit is clean and very good condition. The Canon Power Winder A2 was introduced when along with the AE-1 Program in 1981. But it is compatible with all the rest of the Canon A-series models. It automatically advances the film at a rate of about two frames per second. You only have to hold the shutter button down for continuous shooting capability, or release your finger from the button after each exposure and the film will automatically wind a single frame. Compact and easy to use, the Power Winder A2 automatically stops at the end of each roll of film. It is especially suited for fast-action photography and enables you to capture a subject's movement or changing expressions. Furthermore, when it is coupled with the Canon A-1 or AE-1 PROGRAM, Canon's remote control accessories can also be attached to the Power Winder A2 and this has further enhanced versatility for the two cameras. Although it was designed as an dedicated companion winder for the AE-1 program, other A series camera models such as Canon A-1, AE-1 PROGRAM, AE-1, AV-1, AT-1 and AL-1 can also be used with it. Note: Third party reference book claimed the professional New Canon F-1 'may' also be used* but since none of the motor drive/winders designed for Canon's A-series SLRs offer a power rewind feature, thus, even if such combination exists, the power rewind feature is definitely not possible with the New F-1. (more info available on the power rewind feature on New F-1). Another key advantage over the earlier Winder A was it's more responsive in actual operation. The winder A2 will automatically advance to the next frame and you need not have to release the finger from the shutter release button (The original Winder A required you to do that). Further, since the Power Winder A2 has a remote control socket for use with the A-1 and AE-1 PROGRAM, shooting from a distance is possible via the socket with Remote Switch 3 or 60, or Wireless Controller LC-1, or Interval Timer TM-1 Quartz (optional accessories) (Note: But remote control shooting is not possible when used mounted on models such as AE-1, AV-1 or AT-1). Specifications:Winding Speed: Approximately 0.5 seconds or two frames per second (2 fps).Operation: When the shutter button on the camera is pressed, the winder will function.Shutter Speed Coupling Range: 1/60 to 1/1000 second for continuous photography. "B," or any shutter speed of each camera for single frame photography. (However, if set at "B," AE photography cannot be performed.)Shooting Modes: Controlled by main switch when the Power Winder A2 is mounted on A-1 or AE-1 PROGRAM.Two Positions: "C" for continuous shooting at about two frames per second. (Shutter continuously released and film automatically wound as long as the shutter button on the camera is pressed .) "S" for single frame shooting. (Shutter released when the shutter button is pressed and film automatically wound when the shutter button is released.) When the Power Winder A2 is attached to AE-1, AV- 1 or AT-1: Continuous shooting possible when you keep the shutter button pressed down at either "C" or "S" setting. Single frame shooting possible when the finger is removed from the shutter button each time you press it down once.Film Counting: Performed by the frame counter on the camera.Automatic Cut-off Circuit: If winding stops incompletely (such as when the film roll is completely wound), or if the batteries become exhausted, the winder will automatically stop and the warning lamp (LED) will light up.Remote Control: Possible when the winder is mounted on an A-1 or AE-1 PROGRAM and using Remote Switch 3 or 60, or Wireless Controller LC-1 (optional accessories).Power Source: Four AA size 1.5V alkaline, carbon-zinc or Ni-Cd batteries.Mounting on Camera: By using tripod socket on the camera after taking off the winder coupler cover on the bottom of the camera.Size: 140.8 x2 7.5 x 53.4mm (5-9/16" x1 -1/16" x 2-1/8")Weight: 275 g (9-11 /16 ozs.) counting the weight of batteries.Don't forget to place your buy. By looking on this product you agree to the following terms:Shipping Terms:Buyer pays all shipping costs.Let us know if there is an issue with the shipping costs, as they are automatically calculated by eCRATER.Shipments made to California must include 8.75% sales tax unless we are provided with a valid resale certificate.We reserve the right to ship with Fedex ground, USPS and any other carrier in the best interests of the buyer and seller.The Parcel post option shown is only available to alaska, Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required.Payment Terms:Payment is to be made by PayPalPlease contact us if you have any questions about eCRATER's recent payment policy change.Payment is to be received within ten days of close of product.Should payment not be received within ten days the item will be re-listed and high buyder will forfeit.No personal checks will be accepted.International Terms: (These terms only apply to international shipments.)Buyer is responsible for all brokerage, customs, and or duty charges.Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund.Payment must be made in US Dollars. Money must be drawn against a US bank. Warranty Terms:No warranty nor guarantee is expressed or implied regarding: usability, functionality, merchantability, or cosmetic appearance of the item(s) in product.What you see in the picture(s) is what you get nothing more nothing less.Test results of item(s) in product are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as "Untested" are simply that we have been unable to test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions, Such as when we sell a laptop that we don't have an AC adapter for.Our only guarantee is that you will receive the make and model listed in the ad.The maximum liability of Best Stuff To You is the high buy of the product.Return Terms:Returns are only allowed under cases of gross misrepresentation in the ad, such as when we describe a monitor as a fax machine. Such claims of misrepresentation must be filed within three days of receipt of shipment. Best Stuff To You reserves the right to replace the item(s) or refund the high buy solely at our discretion. Item must be returned in the original box and packaging.buyder must request a RMA number before returning item(s). Packages returned without a RMA number will become property of Best Stuff To You ten days after receipt unless buyer has paid return shipping within the ten day period.All software and toner cartridges are sold as-is No returns.See the refund policy on the listing page or send a message for more information about our return policy.Shipping Damage Terms:Seller will file a shipping claim(s) upon behalf of the buyer with common carrier in the event shipment(s) is/are damaged during shipping, in some cases. Not retaining the original box and packaging may affect the carriers decision on a claim.Seller will commence filing the claim once buyer has filed the damage report with the seller. Buyer must notify seller within 48 hours of receipt of a damaged shipment.Medical Terms:The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that eCRATER deems these terms are applicable to:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.The buyer will not hold the seller, eCRATER or the item's manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device.Please note before looking that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into serviceDan Rydell in San Diego, CA, USAPhone: 619-519-0869Business name: Best Stuff To YouItem Condition Terms:The description for "used" given in the item specifics is eCRATER's definition of "used" and does not necessarily describe this item. eCRATER requires a condition from the options of 1. new, 2 new, other, 3Used, 4 for parts or not workingClearly there is a gray area between 3 and 4.It is not fair to the buyer or seller to say for parts or not working when it is just "untested".On these listings, our company's condition "used" does NOT necessarily mean "fully operational and functions as intended". If fact it may have unknown flaws and deficiencies. the item has only been tested to the extent described in the testing notes. Additional testing may be performed upon request of the buyer before shipment to ensure a satisfactory transaction for both parties.If any provision of this product Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect.Copyright 2013 beststuff2u- All Rights Reserved.