- TI OMAP3530 Processor based on 600MHz ARM Cortex-A8 core
- 256MByte DDR SDRAM and 256MByte NAND Flash
- UART, USB OTG, Ethernet, Camera, Audio, SD/MMC, Keyboard, Jtag,...
- Supports 24-bit TFT LCD, DVI-D and TV S-Video Output Display
- Supports Linux2.6 and WinCE 6.0
Notice: This product is at risk of out of stock, people need it in a harry should ask us for lead time.
The Texas Instruments OMAP3530 is a high-performance processor based on the enhanced OMAP 3 architecture. It includes many internal subsystems designed to support high-speed, multi-thread processing applications. The OMAP3530 includes an integrated advanced Superscalar ARM Cortex-A8 core, an IVA2.2 subsystem with a C64x+ digital signal processor (DSP) core, 2D/3D graphics accelerator, display subsystem, a camera ISP (Image Signal Processor), and high-performance system interconnects and industry-standard peripherals. The device includes state-of-the-art power-management techniques required for high-performance mobile products and supports high-level operating systems such as Windows CE, Linux, Symbian OS and Palm OS.
Evaluation Board is a compact board using OMAP3530 microprocessor. It takes full features of this processor and supports 256MByte DDR SDRAM and 256MByte NAND Flash as well as high-speed USB2.0 OTG function. The board has exposed many other hardware interfaces including RS232 serial port, LCD/TSP, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C and JTAG. The board has two methods to boot the system from either SD card or NAND flash. It is able to support WinCE and Linux OS and provided with WinCE6.0 BSP and Linux2.6.28 BSP. We also provides demo of Google Android OS and Angstrom (GPE) for user experience.
Evaluation Kit includes the DevKit8000 evaluation board and all necessary accessories to help users start their design of multimedia applications. The board is preloaded with Linux OS in NAND flash and WinCE OS in SD card. User can display the subsystem using a 4.3" or 7 inch TFT LCD and Touch screen or using a DVI-D monitor through an HDMI to DVI-D calbe, or using TV for NTSC/PAL video out. The USB OTG interface can also be used as USB Host function with a Mini-A to Standard-A cable, or used as USB Device function with a Mini-B to Standard-A cable. The board has audio and video codecs, with the help of DSP, H.264, MPEG4, CIF, and D1 media formats all can be supported. Along with the kit, We provides user manual, schematic drawing and datasheet documents to help customers better understand and use the kit.
Evaluation Kit
One DevKit8000 Evaluation board
One 4.3 or 7 inch TFT LCD (Including Touch panel)
One SD card
One Serial cable (IDC10-to-DB9)
One 5V@2A Power adapter
One Touch Pen
One USB cable (Standard A Male to Mini-B Male)
One USB cable (Standard A Female to Mini-A Male)
One Cross Ethernet cable
One HDMI to DVI-D cable
One S-Video cable
Features of DevKit8000 Evaluation Board
Dimensions: 110mm x 95mm
Working temperature: -20 to 70 C
Processor: TI OMAP3530 microprocessor with 600MHz ARM Cortex-A8 RISC Core
Power supply: +5V
128MB DDR SDRAM, 166MHz
128MB NAND Flash, 16bit
LCD/Touch Screen interface (50-pin FPC connector, support resolution up to 2048*2048)
DVI high-resolution image output port (HDMI interface, support 720p, 30fps signal)
S-Video display interface
One audio input interface (3.5mm audio jack)
One 2-channel audio output interface (3.5mm audio jack)
One 10/100M Ethernet interface (RJ45)
One High-speed USB2.0 OTG port (Mini USB type interface)
One High-speed USB2.0 Host port (USB A type interface)
Two serial ports (one 3-wire RS232 serial port led out from 2.54mm 10-pin connector and one 5-wire TTL serial port led out from expansion connector)
SD/MMC interface (supports 3.3V and 1.8V logic voltage)
One camera interface (30-pin FPC connector, support CCD or CMOS camera)
6*6 keyboard interface
One 14-pin Jtag interface
Four buttons (Reset, Boot, User defined, On/Off)
One expansion connector (2.0mm 40-pin SMT Female Pin Header, McSPI, McBSP, I2C, HDQ, GPIO are led out from this connector)
Supports Camera, WiFi, GPS, GPRS, 3G module, please find in modules and accessory catalog.
Software
OS
Item
Feature
Description
Linux Boot Version X-loader-1.41 U-boot 1.3.3
Boot Mode Boot Linux from SD card, NAND Flash or Ethernet
Image update Support updating image from SD card or Ethernet
Kernel and drivers Version Linux 2.6.28
File system Format ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS
Driver Serial, RTC, NET, Nand, LCD, Touch Screen, MMD/SD, USB OTG, DVI, Keypad, LED
File System File System Format Ramdisk File System, UBI File System
Function Provided Lib (ALSA -lib, tslib, glibc), udev support
Demo Angstrom Audio (XMMS), network (firefox), graphics editor (gimp) and document processing software (Abiword)
Android Google developed a platform based on Linux open-source mobile phone operating system.
DVSDK Support MPEG4, MPEG2, H264, mp3, aac audio/video formats and Codecs
WinCE Boot Version x-load-1.41, eboot
Boot Mode Boot WinCE from SD card, NAND Flash or Ethernet
Image update Support updating image from SD card or Ethernet
System Characteristic KITL kernel debug, Reboot, Watchdog, RTC
Driver display driver DVI, TFT LCD
SD card, Keyboard, McSPI, McBSP, Audio, NET, NLED, USB OTG
Function Power Management (backlight drive, battery-driven, sleep/wake-up function)
Hive registry support
ROM file system support
Software features Mediaplayer 9.0, Word and Internet Explorer 6.0
.NET Compact Framework 3.5
Item OMAP3530 Evaluation Kit (Standard Configuration)
Hardware
One DevKit8000 Evaluation board
One 512MB SD card
One Serial cable (IDC10-to-DB9)
One 5V@2A Power adapter
Software
and
Documents - Documents (user manual, schematic drawing, Datasheet)
- WinCE.net 6.0 BSP
- Linux 2.6.28 BSP
Price
Version 1, US$199
Item OMAP3530 Evaluation Kit (Complete Configuration)
Hardware
One DevKit8000 Evaluation board
One 7inch LCD (With Touch panel INNOLUX AT070TN83 7"LCD Model, please add US$20 for choosing 4.3"LCD, or add US$40 for 5.6" LCD)
One 512MB SD card
One Serial cable (IDC10-to-DB9)
One 5V@2A Power adapter
Software
and
Documents - Documents (user manual, schematic drawing, Datasheet)
- WinCE.net 6.0 BSP
- Linux 2.6.28 BSP
Price
US$229
+50USD for addional cables:
One Touch Pen
One USB cable (Type A Male to Type Mini-B Male)
One USB cable (Type A Female to Type Mini-A Male)
One Cross Ethernet cable
One HDMI to DVI-D cable
One S-Video cable ... [full description] |
