You are looking on a BRAND NEW HANNA TDS1 METER 98301
Total Dissolved Solids Tester by Hanna Instruments Reads TDS Up To 1999 PPM
Great For Testing the PPM's Of Ionic Mineral Solutions! As well as testing Hydroponics Solutions, RO/DI Water, Metal Halide and High pressure sodium. Total Dissolved Solids Tester manufactured by Hanna Instruments
These Meters Are BRAND NEW and
We are selling way below retail!! ONLY$40.95 EACH ON SALE NOW FOR A LIMITED TIME ONLY!!
Housed in a pocket sized ABS case, this electronic Total Dissolved Solids tester is very durable. It is the ideal meter for hydroponics, fish farming, agriculture, plating and water purification applications. TDS 1 is supplied complete with protective cap, calibration screwdriver and 4 x 1.4V batteries and storage case.
Wide Measurement Range = 1 to 1999 ppm
Excellent Accuracy+ 2% Full Scale
Long Battery Lifemore than 1000 measurements
ATC Automatic Temperature Compensation 0-50 C
One-Point Calibration 800 PPM Calibration Solution Not included - Sold Separately
Each meter is pre-calibrated to the proper setting by Hanna at the factory. There is no need for you to calibrate the meter upon receipt. It is ready to use straight out of the box. Hanna recommends checking your calibration every few weeks or after testing harsh chemicals. To calibrate your TDS1 Tester, use Hanna 800 PPM calibration solution, #HI70080 - sold separately in 20ml packets.
Easy To Use
Simply push the switch to the ON position. Stick the tip of the meter into your solution. The amount of total dissolved solids in your solution, in PPM's (parts per million), is displayed on the readout.
All orders are shipped next business day after payment has cleared.
DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS. This popular line of Dissolved Solids Testers have been redesigned to offer a host of improvements.
The casing has been modified to provide increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape.
The temperature sensor is exposed to provide faster response time.HI 98300, HI 98301 (DiST 1) and HI 98302 (DiST 2) perform TDS measurements, while HI 98303 (DiST 3) and HI 98304 (DiST 4) provide conductivity readings. If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.