Duracoat Firearms Refinishing Desert Mirage Sand
Shipping: US-Mainland: $13.25 (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
THIS HAS TO BE SHIPPED GROUND.
The DuraCoat Firearm Finishes Direct provides the DuraCoat System which is the very latest in firearm finishing technology. No other commercially manufactured and packaged firearm finishing system offers the versatility, durability and user friendly characteristics of DuraCoat. DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was designed for the average gun owner. Preheating, baking and blasting are not required. Expensive, space consuming equipment is not needed. Simply clean and degrease the surface prior to application. DuraCoat is permanent, and provides a professional finish.
As an average gun owner, can I properly apply DuraCoat products without training?
Absolutely! DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was designed for the average gun owner. Preheating, baking and blasting are not required. Expensive, space consuming equipment is not needed. Simply clean and degrease the surface prior to application. If you don't have access to an airbrush, HVLP spray gun or conventional spray gun, our EZ Airbrush (#1SAB) is all the equipment needed and sells for less than $25.00.
If I have a problem applying DuraCoat, what can I do?
If you need assistance of any kind, call 1-800-830-6677 Monday through Friday 6:00AM to 8:00PM (CST) and Saturday 10:00AM to 6:00PM (CST). A team of DuraCoat technicians are available to assist you with all aspects of the DuraCoat process. From selecting the most suitable DuraCoat product, color or pattern for your application to troubleshooting prep or finishing situations, we are here to help you.
How durable is DuraCoat?
DuraCoat is permanent. With normal use, a firearm finished with DuraCoat will last several lifetimes.
What is DuraCoat?
DuraCoat is a two part chemical coating. Unlike other firearm finishes, DuraCoat was created specifically for firearms. Other firearm finishes are "spin-off's" from other industries.
Is DuraCoat Teflon based?
No. Teflon is a lubricating coating which is great for internals, but will not wear as well as DuraCoat on the exterior surface of a firearm. DuraCoat's combination of elasticity and hardness creates a finish impervious to impact, scratching and the elements. Some users say DuraCoat displays some lubricating qualities, but this phenomenon was never intended when DuraCoat was created.
Do I have to be a certified finisher to purchase DuraCoat products?
Absolutely not! DuraCoat can be purchased by anyone. DuraCoat was designed for gun owners with little or no firearm finishing skills.
How do I apply DuraCoat?
DuraCoat can be applied by airbrush, conventional spray gun, or HVLP spray gun.
Can DuraCoat be brushed on?
No, absolutely not. DuraCoat is for spray application only.
If DuraCoat is so easy to apply, why do you offer workshops?
The workshops focus on special prep and application techniques for the commercial DuraCoat finisher.
Will DuraCoat adhere to hard coat anodizing and Parkerizing?
DuraCoat loves hard coat anodizing and Parkerizing as a base. Both processes leave a good rooting surface for DuraCoat.
How much DuraCoat is needed to finish one rifle?
A 4 oz. container of DuraCoat will coat 1-2 long guns or 2-4 handguns.
Are the Peel 'n Spray templates reusable?
Yes. Most patterns can be used up to 6 times. The MirageFlage pattern is difficult to reuse because of the many angles. To reuse the template, remove from the firearm and place on wax paper for future use.
Do I need a special degreaser?
Yes. Some degreasers, especially those used in the automotive industry, can leave a residue. This residue will form a barrier between the surface and DuraCoat causing a coating failure. We manufacture TruStrip degreaser solely for the firearms industry. TruStrip is capable of cleaning the contaminates commonly found on and in firearms and will not leave a residue.
Do I need a special solvent to clean my airbrush or spray gun?
Lacquer thinner will work, but clean your equipment with DuraCoat reducer occasionally. This will keep your airbrush or spray gun in top working condition.
Is reducing DuraCoat required?
Depending on your spray equipment, spray technique, climate and environment your DuraCoat may or may not need reducing. If your DuraCoat does not lay down smooth on the surface of your firearm, it most likely needs to be reduced. Always have some DuraCoat Reducer on hand as it may be required on given days due to weather conditions. DuraCoat Retarder Reducer cures problems normally occurring in high humidity weather. One of these high humidity problems called "blushing" makes the DuraCoat appear cloudy. Another called "dry spray" occurs when some of the DuraCoat dries before it reaches the firearm and causes a rough or dusty surface.
Can I blend DuraCoat colors together?
Yes. All DuraCoat colors can be intermixed. With a handful of standard DuraCoat colors, you can create an infinite number of colors by blending them.
When is DuraCoat fully cured?
DuraCoat is dry to the touch in 20 minutes, can be handled in 1 hour and is ready for use overnight. Although DuraCoat will gain most of its final hardness, elasticity and chemical resistance over a 2-3 week period, time will continue to enhance DuraCoat's characteristics over a lifetime. DuraCoat, like fine wine, gets better with age. As we say, "DuraCoat wears in, not out."
How do I apply DuraCoat to wood?
Degrease and lightly sand wood surfaces. Use DuraFil to remove any scratches and dings, then apply DuraCoat. Allow to dry overnight. Do not bake.
I hunt along saltwater. Will DuraCoat withstand the salty environment?
Certainly. DuraCoat is well suited for salty environments. One of DuraCoat's attributes is its extreme ability to resist salt corrosion. A firearm coated with DuraCoat simply will not rust...EVER!
What is the shelf life of DuraCoat?
The shelf life of DuraCoat is 12-18 months if properly sealed and stored in a cool, dark place. The shelf life of DuraCoat hardener is 6 months, but can be extended by sealing it in a zip lock bag and placing it in a refrigerator.
Will DuraCoat burn off my barrel?
DuraCoat can withstand temperatures as high has 500-600 degrees F. With "normal" shooting, your barrel will never get close to being that hot. If you are fortunate enough to own a transferable machine gun, or if you like to "blaze" with your semi-auto, do not put DuraCoat on your barrel, as your barrel temperature will rise to over 1,000 degrees F. In those cases, use DuraHeat. Our DuraHeat coating can handle temperatures up to 1,800 degrees F.