Rugged, Seaworthy Inflatable Sportboats
take you where you want to go ... fast!
Whether you go boating on rivers, lakes, bays or oceans, Sea Eagle Sport/Runabouts can handle whatever nature throws at you.
The World's best Floorboards
Floorboards are very important for inflatable boats, they need to be strong yet light and durable and easy to assemble. You might find some of these qualities in other materials, such as plywood or aluminum, but you won't find them all in any other floorboard system than the Sea Eagle plastic floorboards.
Fiberglass Reinforced Transom
Most inexpensive competitors have painted plywood transoms. A coat or paint or two might cover up the wood, but no paint job can keep out water for long. In a few years a painted plywood transom will just rot away.
The transom is the most crictical structural part of a boat - it must carry the weight and thrust of a heavy outboard motor over bouncing chop. Sea Eagle Transom Boats feature Fiberglass Reinforced Transoms for strength and durability that plywood just can't match.
Deep V Inflatable keel
Your Sport Runabout will cut through light chop with ease thanks to a deep-vee inflatable keel.
Rugged, Secure Aluminum Seats
Many other inflatables use cheap, heavy plywood seats, but Sea Eagle uses rugged extruded aluminum seats that are mounted with our tongue-and-groove mounting system.
Rounded pontoons for fast planing
Larger, more powerful outboards often cause bow rise in other boats. Our Sport/Runabouts have rounded rear pontoons to get you up on a plane in the shortest possible time.
Material you can hit with a hammer
The Sea Eagle reinforced hull material can take this incredible pounding ... so you don't need to sweat bumping into the dock now and then.
* NMMA & CE Certified
* Plastic floorboards for easy assembly, long term durability and greater strength
* 5/8" grab line along sides for safety
* 6" Inflatable Keel
* Rounded rear pontoons for rapid planing
* Splash Guards on transom
* Two stainless steel D-rings for towing
* Two Aft Carry handles
* Front lifting handle
* Oarlocks pop up for instant use
* Rubbing Strake around hull and under Keel for extra protection.
* Two layers of material on lower tubes for greatest abrasion and puncture resistance.
* One self bailing drain valve
* Boat Carry Bag included
* Wide beam hull design for stability
Exterior: 9' 2" x 5' 4"
Interior: 6' 1" x 2' 8"
Deflated: 44" x 22" x 10" (hull) 31" x 38" x 3" (floorboards)
Tube Diameter: 15.5"
Capacity: 4 Adults or 1000 lbs.
Weight: 75 lbs. (hull) 96 lbs. (w/ roll-up floor) 104 lbs. (w/ rigid floor)
Chambers: 4 (port, starboard, bow & keel)
Material: 1000 Denier Reinforced
Seam: Quadruple Overlap Seam
Floor: Aluminum Roll Up or Molded Polyethelene Floorboards
Air Valves: 4 Halkey Roberts One Way
Engine Capacity: 10 hp (125 lbs. max weight)
Speed Estimates: (with a 9.9 hp) 18 mph with 2 adults, 12 mph with 4 adults
Inflation & Assembly time: 15 min.
Hull Box 46x22x10 Kit Box 40x33x7
Would you hit an inflatable boat with a claw hammer? We hit the hull 1000 denier hull material in our Sea Eagle boats with a claw hammer .... with the sharp claw end.