$3.99
Add to Cart
David Gilmore Signature Decal Waterslide For Guitar
A really nice decal for you to apply anywhere on your guitar headstock or other surface.
The decal is waterslide based.
Instructions to apply decal:
1. Cut out around the decal leaving the smallest possible border around the edge of the letters.
2. Place Decal in a bowl of water and wait about 40 to 60 seconds
3. Pick The decal up after it has soaked in the water
4. Wet the surafce you need the decal to be on.
5. Place the decal on the desired position and "slide" the film to the desired position.
6. Use a clean cloth and tap out the water bubbles trapped in the decal, repeat until
the decal is flat
7. Wait for Decal and surface to dry
8. If the decal is slanted or not in the correct position, you
can add more water to the surface and readjust it.
The decal is waterslide based.
Instructions to apply decal:
1. Cut out around the decal leaving the smallest possible border around the edge of the letters.
2. Place Decal in a bowl of water and wait about 40 to 60 seconds
3. Pick The decal up after it has soaked in the water
4. Wet the surafce you need the decal to be on.
5. Place the decal on the desired position and "slide" the film to the desired position.
6. Use a clean cloth and tap out the water bubbles trapped in the decal, repeat until
the decal is flat
7. Wait for Decal and surface to dry
8. If the decal is slanted or not in the correct position, you
can add more water to the surface and readjust it.
Other Products from zooleng (View All)
-
$3.99
-
$3.99
-
$3.99
-
$10.00
-
$10.00
-
$10.00
-
$10.00
-
$3.99
-
$10.00
-
$3.99
SG, Singapore