*ITEM: SEARS CRAFTSMAN Rotary Dremel Type Tool and Accessories
*RPM: 5000 to 35000
*MATERIAL: High impact poly
*MEASURES: Approx. 8 1/2" long
*CONDITION: Tested by me. Good used, tool was plugged in, turned on and tested and the motor appeared to run OK. The speed knob on the back was turned to low then high and a very, very noticeable RPM change was heard. Tool turned on/off without any problems. A drill bit was placed into the chuck and tightened and it snugged down alright and did not come out when the tool was turned on. The flex shaft was attached as instructed and all worked well (Collet and collet nut have to be removed and the driver cap has to be installed before the flex shaft is attached. Collet and collet nut then get re-installed on the bit end of the flex shaft. After the flex shaft is removed the driver cap has to be taken off the tool and the collet and collet nut have to be re-installed back on the rotary tool). The other accessories were not tested that come with this kit, just visually inspected and all appeared to be good. Any missing little parts or pieces will have to be purchased from Sears.
The flex shaft tool stand was unopened and I opened it up to inspect it. All the parts appear to be intact.
* Carry case
* Rotary tool
* 40" flex shaft
* Edge guide
* Cutting guide
* Various grinding, drilling and sanding bits
* Retails over $140.00 with all the accessories
*A picture that can be magnified to full screen will be sent upon request.
*Buyer is responsible for any maintenance or repairs needed if any.
*Buyer is responsible for any maintenance and responsible for replacing any little things that might be missing.
*This item will be sold "as-is" in tested & used condition. No warranties or guarantees come with the purchase of this item.
*Buyer is responsible for making sure all is correct with the item and the item will suit the buyers needs and expectations before purchase. Buyer is responsible for making sure purchase of this item is not a mistake.
*Items sold are inspected and photographed at different angles before being boxed up and shipped to the buyer. Any attempts to return broken items in exchange for what's been shipped to the buyer, make the purchase and exchange parts that are needed then send unit back for a refund, extort partial refunds or get a refund due to a mistake made by the buyer in the purchase of the item will be reported immediately.
The shipping weight will be 9 1/2 lb and .75 cents for delivery confirmation. Shipping insurance is added into the shipping charge. A handling fee is charged to cover the time and any expenses associated with the packing and shipping of packages. Anything left is put towards the selling fee's.