Details
pixel KING i-TTL Wireless Flash Trigger Nikon with 2 Receivers High speed sync

Product Function
King For Nikon
1. Support I-TTL, TTL,M, BL, FP function.
2. Up to 3 difference group and 7 combination on the flash transceiver.
3. Support all the shutter speed, sync speed up to 1/8000s;using the PC socket control the studio ight which also support 1/8000s sync speed.
4. Multi control the speedlite or studio light.

Introduction

The King is a second generation system, with the TTL-control based upon the Knight first released in 2009. Like the Pixel Knight, camera's hot-shoe.

The body is similar to the Pixel Bishop. It uses the 2.4 GHz frequency (unregulated worldwide), and Pixel indicates that has a reach of around 100 meters.


Pixel King pair (receiver and transmitter). Photo: Pixel.
The King provides 7 selectable channels and 3 different groups. For power, both the TX and RX use two AA-sized batteries. Both the TX and RX have an USB-socket to allow firmware updates. Both the TX and RX have a hot-shoe. The RX hot-shoe is for mounting remote Speedlites. However . Instead Pixel has hinted that they may later introduce a separate control unit (dubbed “N-ETTL”) that can be mounted in the TX hot-shoe and used like the PocketWizard AC3 Zone Controller.

Here is a rundown of its main features:

1 Support EV
2 Support FE lock
3 Support red-eye reduction function
4 Available to control the focal length
5 Support 3 flashes output as different power
6 Support flash group setting on transmitter
7 Support front- curtain sync, HSS sync, rear-curtain sync
8 Support High speed sync for studio and outdoor light
9 Support well known brand flashes for High speed sync and TTL. (Metz, Sigma, Sunpak, Nissin)
10 Support well known brand flashes for trigger. (Does not support high speed sync and TTL flash)
11 Support firmware upgrade
12 Support multi receiver control
13 Support flash focusing light

Support camera external flash control flashgun
SB-900,SB-910,SB-800,SB-700,SB-600,SB-400

Aftermarket flash: Metz, Sigma, Sunpak, Nissin

Package Included:
KING Transmitter x1
KING Receiver x2
PC to 3.5mm studio flash cable x2
PC to 6.35mm studio flash cable x2
USB cable x2
SF-18 Flash Stand Holder x2
Receiver holding mount x2(The holding mount is for studio lamp. It has double tape sticker)
Hot shoe protection cover x3
Protector Soft Case x2
English User Manual x2
(Original Manufactory Package)