Details
PIXEL KING Wireless Flash Trigger for Sony E-TTL II 1 Transmitter 4 Receiver
(This SET include 1 Transmitter and 4 Receivers)

The King Support Sony ADI-TTL, TTL, M mode. provides 7 selectable channels and 3 different groups. For power, both the TX and RX use two AA-sized batteries. Both the TX and RX have an USB-socket to allow firmware updates. Both the TX and RX have a hot-shoe. The RX hot-shoe is for mounting remote Speedlites. However, the TX hot-shoe is not a TTL pass-through shoe, and can not be used to mount an additional Speedlite. Instead Pixel has hinted that they may later introduce a separate control unit (dubbed “N-ETTL”) that can be mounted in the TX hot-shoe and used like the PocketWizard AC3 Zone Controller.

Function

1,Support EV
2,Support flash group setting on transmitter
3,Support 1st Curtain, 2nd Curtain, High Speed Sync
4,Support High speed sync for studio and outdoor light
5,Support well known brand flashes for High speed sync and TTL
(Metz II, Sigma, Sunpak, Nissin)
6,Support well known brand flashes for trigger.
(Does not support high speed sync and TTL flash)
7,Support firmware upgrade
8,Support multi receiver control
9,Support flash focusing light

King receiver compatible with
SONY ADI-TTL flash
SONY HVL-F58AM HVL-F56AM HVL-F42AM HVL-F36AM
Aftermarket flash
Metz II, Sigma, Sunpak, Nissin
Studio and outdoor flash

Support external flash control in camera menu
SONY A900 A850 A700 A580 A560 A550 A500 A450 A350 A330 A300 A230 A200 A100 A100K...
SONY A55 A33

Package Included:
KING Transmitter x4
KING Receiver x4
PC to 3.5mm studio flash cable x4
PC to 6.35mm studio flash cable x4
USB cable x4
SF-18 Flash Stand Holder x4
Receiver holding mount x4(The holding mount is for studio lamp. It has double tape sticker)
Protector Soft Case x4
English User Manual x4
(Original Manufactory Package)