Description: The XPSS Slave Switch works with the XPS3, XPD3 and XPDI3 Master Wall Switches to complete a 3 or 4-Way installation. The XPSS sends a 120Volt pulse from its Switch Terminal to the Master Switch's Control Terminal via one traveler wire. Dimming can be performed
from either the XPSS or the Master Switch location as long as the load attached to the Master is dimmable, and you must use either of the XPDI3
or XPD3 Master Dimmer Switches. The Master Switches perform all the load control, the Slave simply tells the Master to turn ON/OFF or Brighten/
Dim as applicable in the installation. XPSS is equivalent to RWS19
Specific Requirements: 120VAC
Optional / Supplementary Devices & Modules:
XPS3 20A Wall Switch, XPDI3 Inductive Dimmer Wall Switch and XPD3 Incandescent Dimmer for existing 3 or 4-Way Installations.
For specific wiring connections, see installation Instructions for XPS3 20A Wall Switch, XPDI3 Inductive Dimmer Wall Switch and
XPD3 Incandescent Dimmer Switch.
Note: The XPSS does NOT require any X10 Code Addresses, it is simply a Slave Switch to communicate to the Master Switch. All Address Codes and Switching is performed on the Master Switch.