These 20mm pressure sensitive seals will fit bottles with a 20mm neck size. So they work with any bottles requiring 20/400, 20/410, 20/415 or 20/425 tops. Most of our bottles have a neck finish of 20/410 so these liners will work with most of our bottles.

Press & seal foam liners not only give your products that extra professional edge,

but they also . . .

* Help preserve freshness of your product

* Help prevent oils & liquids from leaking

* Help prevent product contamination

* Help instill customer confidence

* Help authenticate product integrity

The seals come with "sealed for your protection" printing in red ink.

Directions:
Place the disc onto the rim of your bottle neck. Make sure the rim is dry and clean. Twist your cap onto the bottle. Leave in place for at least 30 minutes. This gives the adhesive time to release leaving the disc attached to the rim.

Instead of placing the disc onto the rim of the bottle, you could also place the disc into the cap and then twist the cap onto your bottle.

Please note: These liner are not sticky. The discs have the adhesive embedded into them.

The pressure sensitive foam liners come with adhesive embedded into one side that sticks to the bottle with the pressure used to twist the cap onto the bottle. When the cap is removed, the liner remains on the bottle.

Our liners come to us straight from the factory!