-Game: Mahjong & FK200X
-Video Support: CGA and VGA interface
-Control Support: Touch Screen Panel or Button Switch
-Credit: Coin Selector
-Come with Manual
1) Both 97-fruit-button and Touch-Panel are available interface, selected by DIP SW3-1
2) Both 15.75KHz(CGA) and 31.5KHz(VGA) display mode are available , selected by DIP SW3-2
3) After player coin-in or key-in, he need to select one of the following games to play : Mahjong , FK200X
4) In 97-fruit-button mode , player presses HOLD1 + HOLD5 to exit current game and select desired game again .
5) In touch panel mode , player touches EXIT message box to exit current game and select desired game again .
6) If users control is set to touch-panel, please setup touch-panel as followed:
a、 Power down.
b、 Connect the cable of Touch-Panel to P.C. Board.
c、 Please set the pin4 of DIPSW 3 as ON. And then power up.
d、 Touch the red points at the four corners on screen. System would then enter the Touch-Panel testing mode.
e、 Touch arbitrary position on screen in touch-panel testing mode. If the red point does not appear at the place where you touch, please retry the setup procedure from step a. Otherwise go to the next step.
f、 Press OK button on screen to save setup data.
g、 Power down.
h、 Please set the pin4 of DIPSW 3 as OFF.
i、 Setup procedure is O.K., and you can play this game by Touch-Panel.
l This game and P.C. board are well tested with the MicroTouch touchscreen and Serial/SMT3 controller.
*MicroTouch is a trademark of 3M, Inc., and Serial/SMT3 is one of the controllers of 3M, Inc.
-1 x Funny 2 in 1 CPU Board
-1 x Connection, Setting Manual (English & Chinese)