Exchangeable Cutting Head
Material Head: CRV
Bench Dimension: 525mm (W) X 140mm (D) x 200(H)
Base Thickness Plate: 2.5mm With 6 Mould Hole (10.5mm Diameter)
Total Weight: 7.2kg
1)Bolt Cutter Head I:
Cutting truck seals, chain, wire and bolts.
Cuts up to 10mm Soft material thickness, 8mm Medium material thickness,
2)Wire Rope Cutter Head II:
Cutting wire rope or aircraft cable, both for copper and steel.
Wire Rope Size: 14mm Wire Rope, 6mm Steel Wire
3)Swaging & Cutter Head III:
Swaging Tool with cutter designed for swaging of all wire cable fittings from 1/16 to 3/16 inch
5 Hole Number: 1, 2, 3, 4, 5
Applications.1.58mm (1/16 inch), 2.00mm (5/64 inch), 2.38 - 2.50mm (3/32 inch), 2.78mm (7/64 inch), 3.00 - 3.17mm (1/8 inch), 3.50mm (9/64 inch), 3.96 - 4.00mm (5/32 inch), 4.76 - 5.00mm (3/16 inch)
Includes 2 Side Wire Cutter, Wire Rope cutting capacity is up to 5mm in diameter.
For the ultimate finish to any commercial or home project
Capable of crimping Aluminium, Copper and Stainless Steel Swage
Common Uses: Commercial and Residential Balustarading Marine
Step 1- Cleanly cut wire using side cutters ensuring ends are not frayed.
Step 2 - Thread the wire through one side of the swage.
Step 3 - Bend the wire around the thimble return through the swage
Step 4 - Hold wire in a fixed position and clamp the swage using this tool ensure you select the correct crimping size by checking the chart on the Swaging Tool.
1 x Bench with Handle With Bolt Cutter Head I Installed
1 x Wire Rope Cutter Head II
1 x Swaging & Cutter Head III